This email contains HTML. If it does not display properly click here

CompactPCI - VME - PMC - Multibus II - CompactPCI - VME - PMC - Multibus II

• 1.6GHz Pentium® M, VITA 31.1, extensive I/O, VME SBC

• Dual 1600 x 1200 Graphics PMC Module

• Entry level, PICMG 2.16, CompactPCI SBC

• VITA 31.1, Gigabit Ethernet on VME64 backplanes

• Boards & Solutions exhibition in Reading,  UK

Concurrent Technologies
E-Mail:- sales@gocct.com
Web:- www.gocct.com
Web:- www.cct.co.uk
USA Tel:- +1 734 971 6309
UK Tel:- +44 1206 752626

This extensive front/rear I/O new VME SBC features the 1.6GHz or 1.1GHz Pentium M processor. One to three PMC sites all with rear I/O, USB, VITA 31.1, dual Gigabit Ethernet, keyboard, mouse, serial, up to 1.5 Gbytes DDR ECC memory, graphics and EIDE interfaces. An Extended Temperature version is available. VITA 31.1 white paper is also available

For details see 1.6GHz Pentium M VME Board

The IO PMC/731 is a high performance graphics adaptor suitable for any PMC Host Board. The adaptor supports flat panel displays with a PanelLink™ interface and CRTs with an RGB interface, via a single DVI-I connector. Both displays can be driven simultaneously with the same or different images.

For details see: IO PMC/731 graphics adaptor
étop

This entry level CompactPCI SBC features the 1GHz or 850MHz Pentium III processor. It supports PICMG 2.16, dual Ethernet, IPMI, PMC, Graphics and EIDE interfaces.

For details see PP CP2/P3x CompactPCI SBC
é top

VITA 31.1 standard specifies a standard method for deploying an Ethernet switch fabric in a VME64x backplane without cables and using standard backplane pinouts. The  backplane provides up to two VITA 31.1 fabric slots and, depending on the chassis, a number of VITA 31.1 node slots. Node cards can each support full-duplex connections up to 2 Gigabits/sec to each fabric slot.

For details see VITA 31.1
étop

Vita 31.1 Dual Switch Fabric Technology