This email contains HTML. If it does not display properly click here

CompactPCI - VME - AMC - PMC - CompactPCI - VME - AMC - PMC

All our latest products are now available as RoHS compliant.

RTC Conference
Santa Clara, CA, USA
25th January, 2007

Embedded World
Nuremberg, Germany
13th - 15th February, 2007

RTC Conference
Melbourne, FL, USA
27th February, 2007
 

The AM 100/20x is a high performance double-width full height AdvancedMC® processor module. The module supports the 2.0 GHz or 1.66 GHz Dual-Core Intel® Xeon® processor, with the Intel® 3100 server chipset and up to 16 Gbytes soldered DDR2-400 ECC synchronous DRAM.

For details see AM 100/20x AMC Module

The PP 41x/03x is a high functionality, dual PMC CompactPCI® board supporting the 2.0 GHz or 1.66 GHz Intel® Core™ Duo processor or the 2.16 GHz Intel® Core™ 2 Duo processor with the Intel® E7520 server class chipset. Both processor types contains two CPU cores. The board features up to 4 Gbytes DDR2 synchronous DRAM and a variety of interfaces including mass storage options.

For details see PP 41x/03x CompactPCI SBC

The VX 40x/04x is a PC-compatible high performance VME64x or VXS single board computer supporting the 2.0 GHz or 1.66 GHz Intel® Core™ Duo processor or the 2.16 GHz Intel® Core™ 2 Duo processor. The processor types contain two CPU cores. The board features up to 4 Gbytes DDR2-667 synchronous DRAM and a variety of interfaces including mass storage options. Options for extended temperature operation are available.

For details see VX 40x/04x VME/VXS SBC
é top

The FP 110/019 is a 24-port 10/100/1000Mbps Ethernet Switched Fabric Board for use in CompactPCI® PICMG® 2.16 and VME64x VITA 31.1 Packet Switched Backplane environments. It supports up to nineteen node boards, a fabric to fabric link and for user connections, and four front panel Ethernet interfaces (or two front panel opticals).

The FX 210/01x is an entry-level 1000Mbps baseband IEEE 802.3 Switch Board for use in VXS VITA 41.3 Switched Serial Backplane environments. It supports up to eighteen payload boards, an interswitch port for linking to a second switch, and for user connections, four front panel Gigabit Ethernet interfaces (or two front panel Gigabit optical interfaces).

The AD CR3/PMC Carrier Board can be used with a range of Concurrent Technologies’ PMC host processor boards.  By using a host board PMC site the carrier board allows 2 PMC modules to be added to the host processor board while still operating at 66 MHz and in 64-bit mode.  Functionality is increased with optional support for a Hard Disk Drive and CompactFlash™.  This increases the flexibility and I/O capability of the host board without compromising performance.

The SC PMC/SA1 is one of the first PMC based, 4 port, serial attached disk-storage adaptors. It supports Serial Attached SCSI and Serial ATA, and data rates up to 3 Gbits/s.  The adaptor is suitable for any PMC compliant host board (CompactPCI, VME, Multibus II etc).