1GHz Motorola® MPC7455 PowerPC®, VME64 Processor Board (Discontinued)
This single slot board is designed around the latest MPC7455 PowerPC “G4” processor with speed options of 800MHz or 1GHz and up to 1 Gbyte SDRAM. The VP 742/10x supports two flexible PMC sites, one with rear I/O. The board also features a 10baseT/100baseTX Ethernet interface, two RS232/RS422/RS485 serial ports, six 16-bit general-purpose timers, real-time calendar clock and the Tundra® Universe™ II VME interface.
[Press Release] [Spec Sheet]

Extended Temperature Low Power High Performance Pentium® III single-slot VME Processor Board
At the core of the VP 100/010-E is the Low Voltage 800MHz Intel Pentium III “Tualatin” (0.13 micron) processor in a “Flip Chip” package. The VP 100/010-E provides, soldered on board, 512 Mbytes or 1Gbyte of 133MHz ECC S-DRAM that can easily be upgraded to 1.5 Gbytes via the onboard memory socket. Other features available are a dual 10baseT/100baseTX Ethernet interface, keyboard/mouse interface, PC real-time clock, 2 RS232 channels, 2 USB ports, parallel printer port, watchdog timer, long duration timer and an Asiliant Technologies 69030 graphics interface including Digital Flat Panel support. Operating environment of -25°C to +70°C.
[Press Release]

Intelligent, dual PMC host CompactPCI board, 1.2GHz or 800MHz Pentium® III
The board uses either the 1.2GHz Mobile Intel Pentium III Processor-M or the 800MHz Low Voltage Intel Pentium III Processor 512K with up to 1.5 Gbytes 133MHz ECC SDRAM. Other features available are dual 10baseT/100base-TX/1000baseT Ethernet interfaces, graphics interface, keyboard/mouse interface, floppy disk interface, 3 RS232 serial channels, 1 USB port, parallel printer port, PC real-time clock, watchdog timer and long duration timer. LAN boot firmware is also included.
[Press Release]

VME Intelligent Dual PMC Host I/O Board, 800MHz or 1.2GHz Pentium®  III
The VP 110/01x supports the 1.2GHz Mobile Intel Pentium III Processor-M or alternatively the 800MHz Low Voltage Intel Pentium III Processor 512K. Other features available are a dual 10baseT/100base-TX Ethernet interface, keyboard/mouse interface, PC real-time clock, 1 RS232 serial channel, 1 USB port, parallel printer port, watchdog timer and long duration timer.
[Press Release] [Spec Sheet]

Extended Temperature 850MHz Pentium® III single slot VME CPU board
The processing power is provided by either an 850MHz or 700MHz Pentium III processor equipped with 32 Kbytes of Level 1 cache and 256 Kbytes Level 2 cache. Additional features including high performance Ultra-Wide SCSI and EIDE, 10 or 100Mbps Ethernet using a RJ45 connector, high resolution graphics including support for flat panel displays, up to 256 Mbytes of lower cost SDRAM and support for DiskOnChip®. On board fast hardware byte-swapping is also supported. In addition, the board offers PC-compatible features such as keyboard, mouse, one RS232 serial interface, two USB interfaces, floppy disk interface and printer port.
[Press Release]

Windows® XP Embedded Support
Concurrent Technologies announces support for the Windows XP Embedded operating system across the company’s range of high performance CompactPCI and VME boards, including the latest 1.2GHz Pentium III processor-M based products with Gigabit Ethernet.
[Press Release] 

Up to 1.2GHz Pentium® III single slot VME board
The VP 100/01x is a PC-compatible high performance VME based embedded single board with 512 Kbytes L2 cache, 2 x 10/100Mbps Ethernet, up to 1.5 Gbytes DRAM, EIDE / UWSCSI, CompactFlash, a 64-bit 66MHz PMC site with expansion for 2 more PMC sites.
[Press Release]

500MHz PowerPC® VME board with optional RACEway++™
The VP 741/10x features the popular 500MHz PowerPC MPC7410 “G4” processor. The MPC7410 processor connects to the MPC107 (Chaparral) PCI bridge, chosen for its flexibility and excellent performance characteristics, to interface to 2 Mbytes of “backside” L2 cache, PCI bus, 16 Mbytes of Flash EPROM, and up to 1 Gbyte Synchronous DRAM. The VP 741/10x also features the Tundra® Universe™ II VME interface, a 10baseT/100baseTX Ethernet interface, 2 PMC sites, two RS232/RS422/RS485 serial ports, six 16-bit general-purpose timers and a real-time calendar clock.
[Press Release] [Spec Sheet]

Apr
2002

Two channel Gigabit Ethernet PMC Fiber adapter
2 x 1000Base-SX Ethernet adapter utilizing a multimode optical fiber interface supporting Windows NT®, Windows® 2000, Linux® and Solaris™.
[Press Release] [Spec Sheet] [Block Diagram] [Image]

50MHz or 33MHz Motorola® 68K Dual PMC VME Host I/O board (Discontinued)
Two Motorola processor options; the higher performance 50MHz MC68060 processor provides superscalar architecture, 256 entry branch prediction cache, 8 Kbytes data cache and 8 Kbytes instruction cache whilst the 33MHz MC68040 processor provides 4 Kbytes data cache and 4 Kbytes instruction cache. Additional features of the board include16 Mbytes of Flash EPROM (with onboard switch for dual boot sector), 10/100Mbps Ethernet interface via a front panel RJ45 connector, 2 RS232/422 ports, 1 parallel port, 6 timers and a real-time clock.
[Press Release] [Spec Sheet]

Acquisition of Omnibyte Corporation
Concurrent Technologies acquires Omnibyte Corporation,  based in West Chicago, Illinois. Omnibyte specialise  in VME single board computers using both PowerPC® and 68060 processors from Motorola.
[Press Release]