1.6GHz Pentium® M, CompactPCI® Dual PMC Host Board
Concurrent Technologies is pleased to announce their single slot Pentium M based CompactPCI dual PMC Host board. The PP 310/01x supports the 1.6GHz Intel® Pentium M processor with up to 2 Gbytes 200MHz DDR ECC SDRAM.  To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. As well as two PMC sites with front and rear I/O, the PP 310/01x supports dual Gigabit Ethernet (via a PCI-X bus), PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 310/01x can operate as a system controller board, a peripheral board or as a satellite board (blade) and is front and rear plug compatible with Concurrent Technologies’ popular PP 110/01x family.
[Press Release] [Spec Sheet] [Block Diagram] [Image]

PMC Single/Dual Channel Ultra160 SCSI Controller
Concurrent Technologies introduces its new low power PMC based single/dual channel Ultra160 SCSI controller, capable of SCSI synchronous data transfer rates of up to 160 Mbytes/s. The SC PMC/160 provides board options of either one or two independent Ultra160 SCSI channels by taking full advantage of the LSI53C10x0R Ultra160 SCSI controller family. The SC PMC/160 will i) improve CPU utilization, ii) maximize PCI bus transfer efficiency, iii) maximize SCSI I/O transfer reliability and iv) maximize SCSI drive compatibility. Supporting a wide range of operating systems, the SC PMC/160 is suitable for storage applications such as server systems, distributed computing, video-on-demand or image/signal processing.
[Press Release] [Spec Sheet] [Block Diagram] [Image]

High Performance Commercial/Extended Temperature Pentium III Dual PMC VME Carrier
Concurrent Technologies is extending the operating temperature of its popular high performance VP 110/01x; a VME based dual PMC intelligent carrier that is ideally suited to intensive I/O or data applications. There are now four single slot product versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions are the 800MHz VP 110/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 110/010-E operating over -25°C to +70°C. The VP 110/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. As well as front I/O, the PMC rear I/O signals, from both PMC sites, are routed to P2 and P0. An on-board expansion connector supports an optional dual PMC carrier board, giving four PMC sites in two slots.
[Press Release]

High Performance Commercial/Extended Temperature Pentium III single-slot VME Processor Board
Concurrent Technologies is extending the operating temperature of its popular high performance Pentium III VME SBC family. There are three single slot family versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions consists of the 800MHz VP 101/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 101/010-E operating over -25°C to +70°C. The VP 101/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over
0°C to +55°C. The family supports a single PMC site (32/64-bit up to 66MHz) with an expansion connector providing 2 further PMC sites on an optional carrier. UDMA100 EIDE and Ultra Wide SCSI interfaces are provided with options for an on-board EIDE 1.8-inch disk drive or CompactFlash™/IBM® Microdrive™
[Press Release] [Spec Sheet]

Concurrent Technologies Becomes a Member of Intel Communications Alliance
Concurrent Technologies Plc. is pleased to announce its recent acceptance by Intel® as an Affiliate Member of the Intel Communications Alliance (ICA). ICA is a community of communications and embedded developers and solution providers, offering its members benefits and resources that help them innovate, deliver their products faster, and offer their customers a true competitive advantage.
[Press Release]

Mass Storage Module with CD-R/W and DVD-ROM Drive
The DS MSS/00x is a single or dual slot board providing a variety of storage options. The DS MSS/00x family is designed to interface with Concurrent Technologies' wide range of VME/VME64 compatible CPU boards. The DS MSS/001 supports EIDE ATA100 peripheral devices including a 2.5-inch EIDE  Hard Disk Drive with options for a CompactFlash module or CD-R/W (DVD-ROM combo). The DS MSS/002, a dual slot board supports all the features of the DS MSS/001 but also provides a slim line 3.5 inch floppy disk drive. Both of the boards support a parallel port or serial port (RS232 or RS485) via the front panel.
[Press Release] [Spec Sheet] [Block Diagram] [Image]

CompactPCI® Extended Temperature Intelligent Dual PMC Host I/O Board, 800MHz Pentium III
The PP 110/010-E, an extended temperature version of the very popular PP 110/01x, a single slot CompactPCI based intelligent dual PMC Host I/O board. As well as providing two 64-bit 66MHz PMC sites, the PP 110/010-E supports dual gigabit PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI system monitoring), PICMG 2.1 (hot swap), and can operate as a system controller board, a peripheral board or a satellite board. The board uses the 800MHz Low Voltage Intel Pentium III Processor 512K with up to 1.5 Gbytes 133MHz ECC SDRAM. The PP 110/010-E supports a range of applications that require an operating environment of -25°C to +70°C, typically within the defense, transportation and industrial control markets.
[Press Release]

2.2GHz Pentium 4 Processor-M CompactPCI® Board

The PP 200/01x uses either a 2.2GHz or 1.7GHz Intel® Pentium 4 Processor-M and supports a 400MHz front side bus, 512 Kbytes of high-speed L2 cache and Netburst™ Microarchitecture. The PP 200/01x features the Serverworks™ Grand Champion™ LE System I/O™ core logic, up to 2 Gbytes 200MHz DDR SDRAM (with ECC), Ultra-160 SCSI interface, a 64-bit 66MHz PMC site and three Gigabit Ethernets.

[Press Release] [Spec Sheet]

CompactPCI®  33/66MHz Dual PMC Host I/O Board

The carrier board uses a Hint HB6 PCI to PCI Bridge providing a 32 or 64-bit CompactPCI® interface at 33MHz or 66MHz and includes Hot Swap control, blue LED, "ENUM" and "HEALTHY" signals required for compliance to the PICMG® 2.1 Hot Swap specification.
[Press Release] [Spec Sheet] [Block Diagram] [Image]

VME Extended Temperature 800MHz Pentium® III Intelligent Dual PMC Host I/O Board

The VP 110/010-E provides, soldered on board, 512 Mbytes of 133MHz ECC SDRAM that can easily be upgraded to 1 Gbyte via the onboard memory socket, Low Voltage 800MHz Intel Pentium III “Tualatin” (0.13 micron) processor in a “Flip Chip” package. The processor supports 512 Kbytes of high-speed secondary cache and, in conjunction with the ServerWorks™ ServerSet™ III LE chipset, operates a 133MHz front side bus alongside a 32-bit PCI bus and a 64-bit PCI bus. Operating environment of -25°C to +70°C.

[Press Release]

Dual 2.0GHz Xeon™ CompactPCI® Processor Board
The PP 220/01x uses two 2.0GHz Low Voltage Intel® Xeon Processors, where each processor works within a 35W thermal envelope. The Xeon processor supports a 400MHz front side bus, 512 Kbytes of high-speed L2 cache, Netburst™ Microarchitecture and Hyper-Threading Technology. The board features the ServerWorks™ Grand Champion™ LE System I/O™ core logic (system bus up to 3.2Gbytes/s), up to 4 Gbytes 200MHz DDR SDRAM (with ECC), Ultra-160 SCSI interface, a 64-bit 66MHz PMC site and dual gigabit Ethernet.
[Press Release] [Spec Sheet]

Dual 933MHz Pentium® III Single Slot CompactPCI Processor Board
The PP 120/01x uses two 933MHz Low Voltage Intel® Pentium III processors, where each processor supports a 133MHz front side bus with 512 Kbytes of L2 cache and operates within a 12W thermal envelope. The board also features the ServerWorks™ ServerSet™ III LE core logic, up to 1 Gbyte 133MHz ECC SDRAM, an Ultra 160 SCSI interface and a 64-bit 66MHz
PMC site.
[Press Release]

Dual Channel Fast Ethernet PMC Adaptor
The CL PMC/551, a two channel Fast Ethernet adaptor with 10Base-T and 100Base-TX capability. The adaptor is targeted at applications that will benefit from reducing the CPU’s Ethernet processing load while maintaining low system latency.
[Press Release] [Spec Sheet] [Block Diagram] [Image]

Concurrent Technologies supports Debian GNU/Linux for PowerPC® boards
Concurrent Technologies announces further operating system support for their range of high performance PowerPC VME boards with the addition of Debian GNU/Linux 3.0. Included in the list of boards supported are  Concurrent Technologies’ latest 1GHz Motorola MPC7455 PowerPC based VME boards.
[Press Release]

800MHz Low-Voltage Pentium III Multibus II Processor Board
The CP PSE/30x is designed to be a form, fit and functional replacement for the
CP PSE/P2x and CP PSE/P3x boards. The board shares the same feature set as its predecessors which includes a high speed Wide Ultra- 2 SCSI interface using the LSI Logic® 53C895 device, a single PMC host expansion slot, 8 Mbytes of application Flash EPROM, 512 Kbytes of BIOS Flash, two RS-232 serial channels and PS/2® keyboard. For compatibility, including legacy software, the board can be populated with one of three different Ethernet controllers; these are the Intel 21143, 82596 or 82551.
[Press Release]