AD PP4/002 - Transition Module
The AD PP4/002 is designed to be used with various Concurrent Technologies CompactPCI® Slot Controllers, for example, the PP 300/02x and PP 302/02x. The Transition Module mounts in the rear transition area of the CompactPCI backplane and provides very simple access to the majority of the I/O functions provided by the processor board. Many I/O functions are provided on the Transition Module’s own front panel as well as from headers mounted on the Module.
Features
- Transition Module for rear I/O:
- 80mm depth as per CompactPCI specification
- single slot
- 80mm depth as per CompactPCI specification
- Interfaces to CompactPCI via J3 and J5
- Dual 10/100/1000Mbps Ethernet via RJ45 connectors on
Transition Module’s front panel
- Floppy Disk interface via a 34-way header
- EIDE interface via 40-way header and either
CompactFlash™ connector or 1.8 inch hard disk drive
fitted:
- supports up to Ultra-DMA 100
- supports up to Ultra-DMA 100
- 2 x Serial ATA150 interfaces via onboard header
- transfer rates up to 150Mbytes/s
- transfer rates up to 150Mbytes/s
- PC speaker via 5-way header
- General Purpose I/O interface via 5-way header
- 2 x USB interfaces via USB connector on Transition
Module’s front panel and 4-way header
- Digital or analog graphics interface
- COM1 port via 9-way D-type connector on Transition
Module’s front panel
- COM2 Port via 10-way header or 9-way D-type
connector
- System fan monitor via 3-way header
- PS/2 keyboard and mouse interfaces via circular mini
DIN connector on Transition Module’s front panel
- Ultra-2 Wide SCSI via 68-way header and connector on
Transition Module’s front panel
- Extended temperature version available:
- -25°C to +70°C (E-Series)
- -40°C to +85°C (K-Series, includes humidity
sealant)
- CompactFlash version only
- -25°C to +70°C (E-Series)
