AD PP5/001 - Transition Module
The AD PP5/001 is designed to be used with Concurrent Technologies’ PP 310/01x and PP 312/01x CompactPCI® Processor boards. The Transition Module mounts in the rear transition area of the CompactPCI backplane and provides very simple access to the majority of the I/O functions provided on the processor board. Many I/O interfaces are accessed through the Transition Module’s own front panel and the remainder from headers mounted on the Module.
Features
- Transition Module for rear I/O:
- 80mm depth as per CompactPCI specification
- single slot
- 80mm depth as per CompactPCI specification
- Interfaces to CPCI via J3 and J5
- Dual 10/100/1000Mbps Ethernet via RJ45 connectors on
Transition Module’s front panel
- Floppy Disk interface via 34-way header
- EIDE interface via 40-way header
- Onboard CompactFlash™/IBM®/Hitachi Microdrive™
connector or 1.8 inch hard disk drive fitted:
- supports up to Ultra-DMA 100
- supports up to Ultra-DMA 100
- PC speaker via 5-way header
- Parallel printer port interface (ECP, EPP and
IEEE1284) via a 26-way header
- USB interface via USB connector on Transition
Module’s front panel
- 2 x RS232 serial ports via RJ45 connectors on
Transition Module’s front panel
- External reset, system fan monitor and general
purpose user I/O via 12-way header
- 2 x PMC I/O via 68-way connectors on Transition Module’s front panel (wiring compatible with Concurrent Technologies’ SCSI PMC modules )
