SERIAL ATA150

• 2 x SATA150 interfaces via 2 onboard standard SATA headers:-

  • transfer rates up to 150Mbytes/s

USB INTERFACES

• USB1 accessed via USB connector on front panel

• USB2 accessed via 10-way header

SERIAL INTERFACES

• 9-way D-type front panel connector for COM1:-

  • RS232 signal level

• 10-way header for COM2:-

  • RS232 or RS485 signal levels

GRAPHICS INTERFACE

• supports a DVI-D connector:-

  • for driving TFT flat panels

  • connector on front panel

STEREO AUDIO INTERFACE

• Onboard CODEC supports:-

  • stereo line-in

  • stereo line-out

  • accessed via 10-way IDC header

OTHER INTERFACES

• PC speaker via 5-way header

• General Purpose I/O interface via 5-way header

ENVIRONMENTAL SPECIFICATION

• operating temperatures:-

  • 0°C to +55°C (N-Series)

  • -25°C to +70°C (E-Series)

  • -40°C to +85°C (K-Series)

• 10% to 90% Relative Humidity, non-condensing (operating):-

  • K-Series includes humidity sealant

• -40°C to +85°C (storage)

• 10% to 90% Relative Humidity, non-condensing (storage)

ELECTRICAL SPECIFICATION

• all voltages to be within ±5%

• +5V@0.2A; +3.3V@0.15A; +12V@0.0 A; -12V@0.0 A

MECHANICAL SPECIFICATION

• 3U form-factor:- 3.9" x 3.2" (99mm x 80 mm)

• single-slot: 0.8" (20.3mm)

• connector: IEC-1076-4-101 for J2

• shock:
  20g, 11ms, ½ sine (operating);
  30g, 11ms, ½ sine (non-operating)

• vibration:
  5Hz-2000Hz at 2g, 0.38mm peak displacement (operating);
  5Hz-2000Hz at 5g, 0.76mm peak displacement (non-operating)