AM 600/20x - Dual SATA Mass Storage Double-Width AdvancedMC™ Module
The AM 600/20x is a double-width full-height (or mid-height) AdvancedMC™ mass storage module. The module supports up to two SATA hard disk drives or two CompactFlash® drives. The AM 600/20x is designed in compliance to AMC.0 and AMC.3 Type S2 (2x SATA on Ports 2 and 3). The AM 600/20x is compatible with Concurrent Technologies AMC processor modules and supports full hot swap and IPMI capabilities. The AM 600/20x is designed for use in AdvancedTCA® or MicroTCA™ applications in the telecommunications, scientific, and defense markets. Application examples include mass storage data servers, database management, or local system storage.
Features
- Double-width, full-height (or mid-height) Advanced
Mezzanine Card mass storage module:
- compliant to AMC.0 AdvancedMC™ base
specification
- compliant to AMC.0 AdvancedMC™ base
specification
- Support for one or two SATA 2.5 inch hard drives:
- compliant to AMC.3 AdvancedMC specification for
storage
- 2 x SATA connections on Ports 2 & 3
- option to support two CompactFlash™ drives or
Hitachi GST Microdrive™
- compliant to AMC.3 AdvancedMC specification for
storage
- Compatible with RAID 0 and RAID 1 systems:
- higher RAID number systems can be supported with
multiple boards
- RAID operation is system dependent
- higher RAID number systems can be supported with
multiple boards
- IPMI management support with E-Keying
- Compatible with Concurrent Technologies' AMC
processor boards
- Extended temperature versions available:
- CompactFlash version only
- -25°C to +70°C (E-Series)
- -40°C to +85°C (K-Series)
- CompactFlash version only
- Single-width version available:
- see separate AM 600/10x datasheet
- see separate AM 600/10x datasheet
- Supported operating systems depend on the AMC processor board used
