CENTRAL PROCESSOR

• 2.16 GHz Intel® Core™ 2 Duo processor T7400:-

  • uses µFC-PGA 478 (micro Flip-Chip Pin Grid Array) package

• 1.5 GHz Intel® Core™ 2 Duo processor L7400:-

  • uses mFC-BGA 478 (micro Flip-Chip Ball Grid Array) package

• common dual-core processor features are:-

  • 667 MHz Front Side Bus

  • 64 Kbytes of primary (L1) on-die cache

  • 4 Mbytes of shared secondary (L2) on-die cache

  • Intel® 64 Technology (64-bit computing)

• no CPU fan; low power processor

• utilizes Intel® E7520 server class chipset:-

  • uses Intel® 6300ESB I/O Controller Hub

• provision for XDP debug port

DRAM

• supports up to 4Gbytes DDR2-400 ECC SDRAM:-

  • up to 4 Gbytes via two SODIMM sockets

  • up to four bit error correction

  • peak bandwidth of 6.4 Gbytes/s

  • dual channel architecture

• accessible from processor and CompactPCI bus

HARD DISK INTERFACES

• 2 x SATA-150 interfaces via J5

• on-board EIDE interfaces:-

• supports up to Ultra-DMA 100

  • secondary channel used for on-board CompactFlash™ site under PMC site

  • options for dual CompactFlash carrier or 2.5 inch disk drive assemblies on primary channel (uses PMC site)

ETHERNET INTERFACES

• 2 x rear interfaces implemented by Intel® 82573L controllers via x1 PCI Express™ links:-

  • support for PICMG 2.16 R1.0 - Packet Switching Backplane (PSB)

  • optional support for rear panel RJ45’s via J3

• front panel interface implemented by Intel 82573L, accessed via front panel RJ45

• supports 10 Base-T, 100 Base-TX, 1000 Base-T

GRAPHICS INTERFACE

• implemented by a Silicon Motion SM722:-

  • 8 Mbytes video memory

  • resolutions up to 1280 x 1024 @ 16M colors

• analog graphics accessed via a 26-way high-density connector on front panel

PMC INTERFACES

• 2 x PMC sites; for PMC site 1:-

  • 32/64-bit, 33/66 MHz PCI operation

  • 3.3V or 5V PCI signaling levels

• for PMC site 2:-

  • 32/64-bit, 33/66/100 MHz PCI/PCI-X

  • 3.3V PCI signaling level

  • XMC (PCI Express Mezzanine Card) interface supported via x8 PCI Express Link

• common features for both PMC sites:-

  • I/O via front panel and via J3/J5

  • Transition Modules support rear I/O

STEREO AUDIO

• AC '97 interface via J5:-

  • codec on AD PP5/002 and AD PP5/003 Rear Transition Modules (RTM)

SERIAL INTERFACES

• up to 3 x RS232 serial channels:-

  • 1 x Tx/Rx channel accessed via a 26-way high-density connector on front panel

  • 1 or 2 Tx/Rx channels via Transition Module

• 16550 compatible UARTs

• front panel supports CTS and RTS, and rear panel supports RI, CTS, RTS, DSR, DTR and DCD

OTHER PERIPHERAL INTERFACES

• PC Real Time Clock (Year 2000 compliant)

• watchdog timer

• 1 x 32-bit Long Duration Timer with processor interrupt capability

• system fan monitor; CPU temperature monitor; voltages monitor:-

  • accessible via IPMI

• 4 x USB 2.0 interfaces:-

  • 1 accessed via a 26-way high-density connector on front panel

  • 3 interfaces accessed via J5

• independent legacy speaker output via J3

• keyboard and mouse interfaces accessed via a 26-way high-density connector on front panel

• LPC (Low Pin Count) bus via J5 to enable the
  AD PP5/001 Transition Module support for:-

  • floppy disk interface

  • parallel port interface (ECP, EPP, IEEE1284)

  • 2 x RS232 serial channels

FLASH EPROM

• 1 Mbyte of BIOS Flash EPROM - 8-bits wide

FIRMWARE SUPPORT

• Phoenix® Server BIOS

• comprehensive Power-On Self-Test (POST)

• LAN boot firmware included

SOFTWARE SUPPORT

• support for Linux®, Windows® 2000, Windows® XP, Windows® XP Embedded, Windows® Server 2003, QNX®, VxWorks®, Solaris™ and LynxOS®

IPMI

• PICMG 2.9 R1.0 (System Management Specification):-

  • implements the IPMB0 interface

  • implements an IPMB1 interface

• on-board Baseboard Management Controller

• supports 8 Kbytes of non-volatile memory

CompactPCI INTERFACE

• compliant with PICMG 2.0 R3.0; 3.3V or 5V signaling levels (universal signaling support)

• 33/66 MHz, 32/64-bit interface accessed via J1/J2 connectors

• PCI-X to PCI bridge for off-board accesses

• J4 connector not fitted

• PICMG 2.1 R2.0 Hot Swap compliant

• operates as a System Slot controller or in a Peripheral slot

• option to disable CompactPCI interface (Satellite Mode):-

  • receives power from CompactPCI bus

  • board can be hot swapped

ELECTRICAL SPECIFICATION

• +5V@6.5A (typical at 2.16 GHz with 1 Gbyte DRAM); +5% / -3%

• +3.3V@3.8A; +5% / -3%

• +12V@0.05A; -12V@0.05A

• +12V and -12V routed to PMC slots

SAFETY

• PCB (PWB) manufactured with flammability rating of 94V-0

ENVIRONMENTAL SPECIFICATION

• operating temperature:-

  • 0°C to +55°C (N-Series)

  • -25°C to +70°C (E-Series: 1.5 GHz))

• 5% to 95% Relative Humidity, non-condensing (operating)

• -40°C to +85°C (storage)

• 5% to 95% Relative Humidity, non-condensing (storage)

MECHANICAL SPECIFICATION

• 6U form-factor: 9.2inches x 6.3inches (233mm x 160mm)

• single-slot: 0.8inches (20.3mm)

• connectors: IEC-1076-4-101 for J1-J5

• shock: 20g, 11ms, ½ sine (operating);
  30g, 11ms, ½ sine (non-operating)

• vibration: 5Hz-2000Hz at 2g, 0.38mm peak displacement (operating);
  5Hz-2000Hz at 5g, 0.76mm peak displacement (non-operating)