Specification Sheet: PP 66x/x71
Dual-Core or Quad-Core Intel® Xeon® Processor SBC
Central Processor
- 2.13 GHz Quad-Core Intel® Xeon® processor L5518 or 2.0 GHz Dual-Core Intel® Xeon® processor L5508:-
- 45nm process technology
- uses 1366-land FCLGA (Flip Chip Land Grid Array) package
- 1066 MHz Memory Bus
- Intel® QuickPath Interconnect (Intel® QPI) at 20 Gbytes/sec
- 8 Mbytes of shared last level on-die cache
- Intel® 64 architecture (64-bit computing)
- no CPU fan
- utilizes Intel® 5520 chipset:-
- uses Intel® I/O Controller Hub 10R (ICH10R)
- provision for XDP debug port
SDRAM
- up to 48 Gbytes DDR3-1066 ECC SDRAM:-
- up to 48 Gbytes via four DIMM sockets
- maximum 32 GBytes using VLP DIMMs
- peak bandwidth of 17 Gbytes/s
- single device data correction support
- accessible from processor and CompactPCI bus
SAS/SATA RAID interface
- 8 port SAS/SATA300 hardware RAID controller implemented by LSI SAS1068E via a x8 PCI Express™ Link
- 8 x SAS/SATA interfaces:-
- accessed via J3
- two Mini SAS 4x connectors (SFF-8088) on the AD PP7/001 Rear Transition Module
- hardware RAID modes supported:-
- mirror
- enhanced mirroring
- striping
- the RAID controller is an optional feature and is mutually exclusive with the PMC Pn4 rear I/O feature
Mass Storage Interfaces
- 6 port SATA300 controller implemented by Intel ICH10R
- 4 SATA interfaces via J3:-
- support for software RAID control
- 4 x drive connectors available on the AD PP7/001 Rear Transition Module (RTM)
- option to support up to two on-board 2.5" SATA300 drives on the RTM
- option to fit 1 x SATA for an on-board 2.5" SATA300 drive (uses the PMC/XMC site)
- 1 x SATA port (via EIDE) used for on-board CompactFlash™ site under PMC/XMC site
- option for USB Flash disk module on the RTM
Gigabit Ethernet Interfaces
- 2 x rear Gigabit Ethernet implemented by two Intel® 82574L Controllers via x1 PCI Express™ links:-
- optional support for PICMG® 2.16 R1.0 - Packet Switching Backplane (PSB)
- front panel RJ45 interface implemented by Intel® 82567 Gigabit Ethernet Controller
- supports 10 Base-T, 100 Base-TX, 1000 Base-T
Option: Front Panel Ethernet Interfaces
- optional module supporting dual 10 Gigabit Ethernet interfaces implemented by an Intel® 82599 via x8 PCI Express link, front panel is:-
- optical fiber 10GBase-SR SFP+ module or
- SFP+ cage for customer's SFP+ module
- optional module supporting dual 1 Gigabit Ethernet interfaces implemented by an Intel® 82576 via x4 PCI Express link, uses RJ45 connectors on the front panel
Graphics Interfaces
- implemented by Radeon E2400 graphics controller via x8 PCI Express Link
- dual independent analog displays
- DVI-I and VGA connectors via front panel:-
- digital, up to 1600 x 1200 @ 16M colors
- analog, up to 2048 x 1536 @ 1073M colors
- support for Microsoft® DirectX 10
- support for OpenGL 2.0, Windows® and Linux®
PMC/XMC Interface
- 1 x PMC site which supports:-
- 32/64-bit, 33/66/100/133 MHz PCI/PCI-X
- 3.3V or 5V PCI signaling
- x4 PCI Express to PCI-X bridge
- I/O via front panel
- optional PMC Pn4 rear I/O via AD PP7/001 RTM; mutually exclusive with the RAID controller feature
- XMC PCI Express link supports up to x8:-
- x4 if PMC PCI/PCI-X- bus enabled
- dual x4 mode if PCI/PCI-X- bus site disabled
Serial Interfaces
- 2 x RS232 serial channels:-
- 1 x Tx/Rx channel accessed via 9-way D connector on front panel
- 1 x Tx/Rx channel via J3
- 16550 compatible UARTs
- front and rear panel interface support RI, CTS, RTS, DSR, DTR and DCD
Other Peripheral Interfaces
- PC Real Time Clock (Year 2000 compliant)
- watchdog timer; 32-bit Long Duration Timer with processor interrupt; chipset timer
- system fan monitor; CPU temperature monitor; voltages monitor; all accessible via IPMI
- 5 x USB 2.0 interfaces:-
- 1 accessed via the front panel
- 4 interfaces accessed via J3
- independent legacy speaker output via J3
- keyboard and mouse interfaces via front panel
Firmware Support
- Insyde Software InsydeH20™ BIOS:-
- includes Compatibility Support Module
- based upon Intel® Platform Innovation Framework for EFI
- LAN boot firmware included
Software Support
- support for Linux®, Windows® XP, Windows® XP Embedded, Windows® Server 2003, Windows Server 2008, QNX®, VxWorks® and Solaris™
Flash EPROM
- 4 Mbytes of BIOS Flash EPROM
IPMI
- PICMG 2.9 R1.0 (System Management Spec.):-
- implements the IPMB0 and IPMB1 interfaces
- on-board Baseboard Management Controller
- supports 8 Kbytes of non-volatile memory
CompactPCI Interface
- compliant with PICMG 2.0 R3.0; 3.3V or 5V signaling levels (universal signaling support)
- 33/66 MHz, 32/64-bit interface accessed via J1/J2 connectors
- PCI Express to PCI bridge (off-board accesses)
- PICMG 2.1 R2.0 Hot Swap compliant as a system slot controller
- operates in left or right system controller slot
- operates in peripheral slots
- option to disable CompactPCI interface (Satellite Mode):-
- receives power from CompactPCI bus
- board cannot be hot swapped
Electrical Specification
- typical for Quad-Core 2.13 GHz (with 8 Gbytes SDRAM and with RAID controller);
- +5V@12.0 A; voltage +5%/-3%
- +3.3V@8.2 A; voltage +5%/-3%
- +12V@1.5 A; -12V@0.0 A; voltage +5%/-3%
- +12V and -12V routed to PMC/XMC site
Safety
- PCB (PWB) manufactured with flammability rating of 94V-0
Environmental Specification
- operating temperature:-
- 0°C to +55°C (N-Series)
- 5% to 95% Relative Humidity, non-condensing (operating and storage)
- -40°C to +85°C (storage)
Mechanical Specification
- 6U form-factor: 9.2inches x 6.3inches (233mm x 160mm)
- dual-slot: 1.6inches (40.6mm)
- connectors: IEC-1076-4-101 for J1-J5