Chinese language English language

 
Specification Sheet: TP 462/34x
Intel® Core™ 2 Duo Processor 3U SBC


Central Processor

  • 2.16 GHz Intel® Core™ 2 Duo processor T7400 or
    1.5 GHz Intel® Core™ 2 Duo processor L7400:-
    • dual-core processor
    • 4 Mbytes of secondary (L2) on-die cache
    • 667 MHz Front Side Bus
  • Intel® 64 Technology (64-bit computing)
  • uses mFC-BGA 478 (micro Flip-Chip Ball Grid Array) package
  • utilizes 64-bit Intel® 945GME GMCH
  • utilizes Intel® ICH7-R I/O Controller Hub

DRAM

  • up to 2 Gbytes DDR2-667 SDRAM:-
    • up to 2 Gbytes via SODIMM socket
    • single channel memory
    • peak bandwidth of up to 5.3 Gbytes/s
  • accessible from processor or CompactPCI® bus

Optional Second Slot Boards

  • second slot board, two options (see diagram)
  • option 1 supports onboard:-
    • PMC/XMC site or 2.5" SATA disk drive
    • CompactFlash® site
  • option 2 supports onboard:-
    • SATA disk drive (or external disk drive)
    • CompactFlash site, accessible via front panel (this site cannot be hot-swapped)

PMC/XMC Interface

  • single PMC/XMC site available on an optional second slot board (option 1 in diagram):-
    • 32-bit, 33/66 MHz PCI operation
    • 3.3V and 5V PCI signaling levels
    • XMC (Switched Mezzanine Card) interface supported via x4 PCI Express port
    • I/O via front panel and 64 bits via J2 on optional second slot board

Hard Disk Interfaces

  • 4 x SATA300 interfaces:-
    • transfer rate up to 300 Mbytes/s
    • 2 x channels accessible via J2
    • 1 x channel routed to 2.5" SATA disk drive on both types of optional second slot board (uses PMC/XMC site on option 1)
    • 1 x channel routed to a CompactFlash® site on both second slot board options
  • 1 x EIDE interface:-
    • supports an on-board CompactFlash site (type 1) on the single slot base board

Ethernet Interfaces

  • 2 x Ethernet channels supporting:-
    • 10 Base-T, 100 Base-TX, 1000 Base-T
    • implemented by 2 x Intel® 82574L via two x1 PCI Express® ports
  • first channel accessed via front panel RJ45
  • second channel accessed via J2 and can be switched to an optional RJ45 on front panel
  • wake on LAN on both channels

Graphics Interface

  • implemented by the Intel® 945GME GMCH
  • dual independent analog graphics outputs:-
    • VGA1 resolutions up to 2048 x 1536 @ 16M colors accessed via a 15-way high density connector on front panel
    • VGA2 resolutions up to 1600 x 1200 @ 16M colors accessed via J2

Serial Interfaces

  • 2 x serial channels
  • COM1 accessed via J2:-
    • TTL level (shifted to RS-232/422/485 on the AD TP1/006 RTM )
    • supporting RI, CTS, RTS, DSR, DTR and DCD
  • COM2 accessed via J2 and via an optional RJ45 on the front panel :-
    • RS-232 line level
    • supporting CTS, RTS, DSR, DTR and DCD via J2 and front panel, RI also via J2
  • 16550 compatible UARTs

Other Peripheral Interfaces

  • power management signals via J2:-
    • output: sleep status
    • inputs: power button, +5V standby voltage
  • PC Real Time Clock
  • long duration timer; watchdog timer
  • legacy speaker interface
  • 4 x USB 2.0 interfaces:-
    • 2 channels accessed via J2
    • 2 channels accessed via front panel
  • 3 x GPO signals via J2
  • 5 x GPI signals via J2

CompactPCI Interface

  • universal signaling support, compliant with PICMG® 2.0 R3.0; 3.3V or 5V signaling levels
  • 33/66 MHz; 32-bit interface accessed via J1
  • operates as a System Slot controller (supporting up to 7 peripheral slots) or operates in a Peripheral Slot
  • PICMG 2.1 R2.0 Hot Swap Compliant
  • option to disable CompactPCI interface (Satellite Mode):-
    • receives power from CompactPCI bus
    • board can be hot swapped

IPMI

  • PICMG 2.9 R1.0 (System Management Specification):-
    • implements the IPMB0 interface
  • on-board Baseboard Management Controller
  • monitors CPU temperature, voltages and fan
  • supports 8 Kbytes of non-volatile memory

Software Support

  • supports Linux®, Windows® XP, Windows® XP Embedded, Windows® Server 2003, QNX® and VxWorks®

SPI Flash EPROM

  • 2 Mbytes of BIOS SPI Flash EEPROM

Firmware Support

  • Phoenix™ TrustedCore BIOS
  • comprehensive Power-On Self-Test (POST)
  • LAN boot firmware included

Electrical Specification

  • +5V @ 3.4A (typical 1.5 GHz, 2 Gbytes SDRAM)
  • +3.3V @ 2.4A
  • +12V and -12V not required
  • all voltages are tolerant to +5% / -3%

Safety

  • PCB (PWB) manufactured with flammability rating of 94V-0

Environmental Specification

  • operating temperatures:-
    • 0°C to +55°C (N-Series: 2.16 GHz, 1.5 GHz)
    • -25°C to +70°C (E-Series: 1.5 GHz)
    • -40°C to +85°C (K-Series: 1.5 GHz)
  • 5% to 95% Relative Humidity, non condensing (operating):-
    • K-Series includes humidity sealant
  • -40°C to +85°C (storage)
  • 5% to 95% Relative Humidity, non condensing (storage)

Mechanical Specification

  • 3U form-factor: 3.9 inches x 6.3 inches (100mm x 160mm)
  • single or dual slot
  • connectors: IEC-1076-4-101 for J1-J2
  • shock:
    20g, 11ms, ½ sine (operating);
    30g, 11ms, ½ sine (non-operating)
  • vibration:
    5Hz-2000Hz at 2g, 0.38mm peak displacement (operating);
    5Hz-2000Hz at 5g, 0.76mm peak displacement (non-operating)