TP CR1/PMC - 3U CompactPCI PMC Carrier Board
The 3U CompactPCI® TP CR1/PMC PMC bridgeless carrier board provides a flexible solution for designers wishing to add PMC I/O functionality to a 32-bit CompactPCI system. The TP CR1/PMC can accommodate one single width PMC module conforming to the IEEE 1386 Common Mezzanine Card standard. A wide range of commercial, or proprietary designed, PMC modules can be supported such as SAS, LAN, WAN, Graphics and Communications Controllers. Front panel access is supported and I/O signals from the PMC site are routed to the CompactPCI J2 connector allowing access from the rear of the system. For harsher environments, extended temperature, ruggedized air-cooled and ruggedized conduction-cooled versions of the TP CR1/PMC are supported.
Features
- 3U CompactPCI® PMC Carrier supports:
- operation with 32-bit 33/66 MHz backplanes
- one single size 32-bit, 33/66 MHz PMC module
- 5 Volt or 3.3 Volt signaling
- I/O via front panel and 64 rear I/O signals via
J2
- 3.3 Volt, 5 Volt, +12 Volt and -12 Volt provided for
PMC modules via CompactPCI backplane
- Occupies one 3U CompactPCI slot
- Extended temperature versions (E-Series, K-Series):
- E: -25°C to +70°C, air-cooled
- K: -40°C to +85°C, humidity sealant, air-cooled
- Ruggedized versions (RA-Series, RC-Series):
- RA: -40°C to +75°C, conformally coated, air-cooled
- RC: -40°C to +85°C, conformally coated, conduction-cooled (at card edge) to ANSI/VITA 30.1-2002
Request a Technical Reference Manual
View the ruggedized conduction-cooled variant
View the ruggedized air-cooled variant
| Contact Us: |
sales@gocct.com
Sales Channels |
