Specification Sheet: TR 501/36x
Intel® Core™ 2 Duo Processor SBC
Ruggedized Single Board Computer
- VPX-REDI SBC, Intel® Core™ 2 Duo processor
- conduction-cooled to VITA 48.2
- conformally coated
- compatible with several OpenVPX (VITA 65) module profiles
- air-cooled VPX version, also available with:-
- optional front panel console module via Console Interface Connector on the SBC
- optional rear panel transition module
Central Processor
- 1.86 GHz Intel® Core™ 2 Duo SL9400:-
- 45nm process technology
- 1066 MHz Front Side Bus
- 6 Mbytes of shared Last-Level on-die cache
- Intel 64 technology (64-bit computing)
- utlizes Intel® GS45 mobile class chipset with Intel ICH9M-E I/O Controller Hub
SDRAM
- supports up to 8 Gbytes DDR3-1066 SDRAM:-
- up to 8 Gbytes soldered
- peak bandwidth of 16 Gbytes/s
- dual channel architecture
- accessible from processor or VPX fabric
XMC Interface
- 1 x XMC site, in a single VPX slot (VITA 42.0):-
- XMC (Switched Mezzanine Card) interface supported via a x4 PCI Express® (VITA 42.3)
- rear I/O P2w1-X24s+X8d+X12d (VITA 46.9)
- +5V powered
Mass Storage Interfaces
- 2 x SATA300 interfaces:-
- transfer rate up to 300 Mbytes/s
- accessible via P1
- option for on-board 4 Gbytes EIDE NAND Flash Disk Module (N-Series or RCx-Series)
Ethernet Interfaces
- factory build option for 2 x 1000Mbps IEEE802.3z SERDES (1000 Base-BX) ports via P1:-
- with software switchable option for 1 x 10/100/1000Mbps Ethernet port (with magnetics) plus 1 x SERDES port
- alternative factory build option for 2 x 10/100/1000Mbps Ethernet ports (one with magnetics)
- implemented by Intel® 82571
- optional 10 Base-T, 100 Base-TX Ethernet:-
- implemented using MAC in ICH9M-E and Intel 82567 PHY
- signals via Console Interface Connector
- magnetics and RJ45 connector on front panel console module
Graphics Interface
- implemented by Intel GS45
- analog VGA accessed via P2 rear I/O:-
- resolutions up to 2048 x 1536 @ 16M colors
- signals also via Console Interface Connector
- support for Microsoft® DirectX 10
- support for OpenGL 2.0 under Windows® and Linux®
Serial Interfaces
- 1 x RS-232/422/485 channel accessed via P1:-
- supporting Tx/Rx. CTS/RTS in RS-232 only
- support Transmit Control in RS-485 mode
- optional 1 x RS-232 channel:-
- signals via Console Interface Connector
- 16550 compatible UARTs
VPX Backplane Interface
- P0, P1 and P2 support OpenVPX configuration
- configurable PCI Express® (PCIe) fabric interface supports:-
- 8 x1 PCIe ports, 2 x4 PCIe ports, 1 x4 + 4 x1 PCIe ports, or a 1 x8 PCIe port
- compatible with OpenVPX module profiles
- PCI Express Gen 1 and Gen 2
- optional non-transparent link 1 to support multi-processing configuration
- 4 channel DMA engine for fast data block moves
Other Peripheral Interfaces
- PC Real Time Clock (Year 2000 compliant)
- long duration timer; watchdog timer
- CPU temperature monitor; voltages monitor; accessed via System Management interface
- 2 x USB 2.0 interfaces accessed via P1
- optional 1 x USB 2.0 interface:-
- signals via Console Interface Connector
- 3 x GPIO signals via P1 and P2
Software Support
- support for Linux®, Windows® XP, Windows® XP Embedded, Windows® Server 2003, Windows® Server 2008, QNX®, Solaris® and VxWorks®
Built-In Test (BIT) Support
- Power-on BIT (PBIT)
- Initiated BIT (IBIT)
- Continuous BIT (CBIT)
Firmware Support
- Phoenix™ TrustedCore BIOS
- comprehensive Power-On Self-Test (POST)
- LAN boot firmware included
Safety
- PCB (PWB) manufactured with flammability rating of 94V-0
System Management
- System Management interface:-
- implements SM0-1 and SM2-3 hardware
- on-board System Management Controller
- supports 8 Kbytes of non-volatile memory
Flash EPROM
- 4 Mbytes of BIOS SPI Flash EPROM
Electrical Specification
- typical current figures (4 Gbytes SDRAM)
- +5V @ 5.0A, voltage +5% / -3%
- +3.3V @ 1.0A, voltage +5% / -3%
- +12V AUX and -12V AUX routed to the XMC site
Environmental Specification
- operating temperature, VPX N-Series:-
- VITA 47 Class AC1, 0°C to +55°C
- useful for bench development
- air-cooled
- storage temperature, VPX N-Series:-
- VITA 47 Class C1, -40°C to +85°C
- operating altitude, VPX N-Series:
- 0 to 15,000 feet (0 to 4,572 meters)
- operating temperature, VPX-REDI RCx-Series:-
- VITA 47 Class CC4, -40°C to +85°C
- conduction-cooled (VITA 48.2)
- storage temperature, VPX-REDI RCx-Series:-
- VITA 47 Class C4, -55°C to +105°C
- operating altitude, VPX-REDI RCx-Series:
- -1,000 to 50,000 feet (-305 to 15,240 meters)
- 5% to 95% Relative Humidity, non condensing
- (operating/storage for N-Series and RCx-Series)
Mechanical Specification
- 3U VPX form-factor (VITA 46.0, VITA 48.0):
- 3.9 inches x 6.3 inches (100mm x 160mm)
- slot widths, N-Series and RCx-Series:-
- 0.8 inches VPX N-Series (VITA 46.0)
- 0.85 inches VPX-REDI Type 2, RCT-Series (VITA 48.0)
- 0.85 inches VPX-REDI Type 1, RCS-Series (VITA 48.0). Where REDI Type 1 is Two Level Maintenance (VITA 48.2)
- connectors to VITA 46.0 for P0, P1 and P2
- operating mechanical, VPX N-Series:-
- shock - VITA 47 Class OS1, 20g
- vibration - VITA 47 Class V1, 0.04g²/Hz
- operating mechanical, VPX-REDI RCx-Series:-
- shock - VITA 47 Class OS2, 40g
- random vibration - VITA 47 Class V3, 0.1g²/Hz