TR XMC/301 - 3U VPX XMC/PMC Carrier Board
The TR XMC/301 XMC/PMC carrier board provides a flexible solution for adding modular I/O functionality to a 3U VPX system. The carrier accommodates one single width XMC or PMC module conforming to the IEEE 1386 Common Mezzanine Card standard, with front panel I/O and 64-bit rear I/O. XMC modules supporting up to x4 PCI Express® (PCIe) interfaces and PMC modules supporting up to PCI-X 133MHz can be used. Support is included for a CompactFlash™ card. The TR XMC/301 backplane fabric interface is configured as dual x4 PCIe. A range of commercial and proprietary designed modules can be supported such as SAS, LAN, WAN, Graphics and Communications Controllers. The carrier provides rear I/O via either a PMC Pn4 or XMC Pn6 connector, where the rear I/O signals are routed to the VPX P2 connector (to an an optional Rear Transition Module). For rugged applications two VPX-REDI conduction-cooled versions are available, the TR XMC/301-RCS is a VPX-REDI Type 1 Two-Level Maintenance conduction-cooled board and the TR XMC/301-RCT is VPX-REDI Type 2.
Features
- 3U VPX based XMC/PMC Carrier supports one single
width XMC or PMC module
- 3U VPX (VITA 46.0) N-Series XMC/PMC carrier:
- air-cooled
- 0°C to +55°C operating temperature
- use in commercial (non-rugged) applications
- 3U VPX 0.8 inch slot
- front panel I/O
- optional rear transition module available
- P1 and P2 VPX interfaces compatible with OpenVPX™
module profiles
- VPX backplane fabric interface supports PCI Express®
(PCIe):
- up to x4 PCIe upstream and up to x4 PCIe downstream
- support for Gen 1 and Gen 2
- compatible with several OpenVPX module profiles
- XMC interface supports:
- x1, x2 or x4 PCI Express®
- x1, x2 or x4 PCI Express®
- PMC interface supports:
- 32/64-bit, 33/66MHz PCI
- 64-bit, up to 133MHz PCI-X
- 64-bit rear I/O via VPX P2 connector:
- option for rear I/O is via an XMC Pn6 or PMC Pn4 connector
- P2 pinout conforms to P2w1-X24s+X8d+X12d or
P2w1-P64s (VITA 46.9)
- CompactFlash™ Type-I site available
- 3.3 Volt, 5 Volt, +12 Volt and -12 Volt provided for the XMC or PMC module via the VPX backplane
- Ruggedized VPX-REDI versions (RCx-Series):
- conduction-cooled to VITA 48.2, conformally coated
- -40°C to +85°C operating temperature (at card edge)
- rear plug compatible with the air-cooled versions (N-Series)
- Concurrent Technologies also provide a range of
3U VPX single board computers supporting Intel® Core™
i7, Intel® Core™ 2 Duo and Intel® Atom™ processors
Request a Technical Reference Manual
View the ruggedized variant
| Contact Us: |
sales@gocct.com
Sales Channels |
