Specification Sheet: XM 403/x33-RC
Dual Display XMC Graphics Adaptor
Ruggedized Conduction-Cooled
Ruggedized Conduction-Cooled
(click to view Ruggedized Air-Cooled or Commercial Air-Cooled)
Ruggedized XMC Graphics Adaptor
- conduction-cooled to ANSI/VITA 20-2001 (R2005)
- conformally coated
- non-ruggedized version also available:-
- see XM 403/x33 datasheet
- air-cooled version also planned:-
- see XM 403/x33-RA datasheet
Graphics Processor
- utilizes S3 Graphics 2300E 3D/2D triple display controller, which
provides:-
- 2 independent display engines
- multi-display capability
- digital resolutions up to 2560 x 1600
- analog resolutions up to 2048 x 1536
- 32-bit true color
- 256 Mbytes of 64-bit dual channel gDDR2 DRAM
- dual integrated RAMDAC
- 128-bit graphics engine
- PCI Express® interface
- supports video overlay
- 350MHz graphics engine clock:-
- depending on the application the RC-Series can be run at a reduced clock rate
- 375MHz gDDR2 memory clock:-
- depending on the application the RC-Series can be run at a reduced clock rate
Digital Interface
- supports 2 x TMDS compliant displays via:-
- DVI 1 accessible via rear I/O PMC Pn4 connector
- DVI 2 accessible via rear I/O PMC Pn4 connector
- supports active matrix (TFT) and passive (DSTN) panels
- up to 2560 x 1600 pixels
- up to 32-bit color
- 60Hz refresh rate
Analog Interfaces
- supports 2 x RGB compliant display:-
- VGA 1 interface configured to either the rear I/O PMC Pn4 connector or the rear I/O XMC Pn6 connector
- VGA 2 interface to rear I/O PMC Pn4 connector
- VGA 2 interface cannot be used simultaneously with TV output
interface:-
- uses same Pn4 pins
- software selectable
- up to 2048 x 1536 pixels
- up to 32-bit color
TV Output Interface
- composite, S-Video or YPbPr (YUV) outputs via rear I/O PMC Pn4
connector:-
- HD-TV capable
- internal CE class encoder for, NTSC, PAL and HD-TV (all 18 DTV ATSC and DVB standards, including 1080p)
- TV output interface cannot be used simultaneously with VGA 2
interface:-
- uses same Pn4 pins
- software selectable
Multiple Displays
- 2 independent display engines:-
- up to 2 displays driven simultaneously with the same or 2 different images
- the same or 2 different resolutions
- the same or 2 different refresh rates
- dependent on operating system software
- using multiple displays lowers the maximum available resolution, color depth and refresh rate
TV Input Interface
- supports multiple standards including
- PAL, NTSC and SECAM
- automatic detection, supports 50Hz and 60Hz field frequency
- suitable for video capture and video stream input
- supports video overlay
XMC Interface
- complies with PCI Express 1.1 protocol and electrical
specification:-
- supports link training for x1 to x8 lane widths
BIOS EPROM
- 1 Mbits Flash EPROM
Software Support
- support for Windows® XP, Windows® XP Embedded, Windows® 2000, and Linux®
Electrical Specification
- requires 3.3V and 5V supplies only:-
- +5V @ 1.5A; +/-5% (typical)
- +3.3V @ 500mA; +/-5% (typical)
- -12V supply not utilized
- +12V supply cannot be used
Safety
- PCB (PWB) manufactured with flammability rating of 94V-0
Environmental Specification
- operating temperature (VITA 47 Class CC4):-
- -40°C to +85°C
- storage temperatures (VITA 47 Class C4):-
- -55°C to +105°C
- 5% to 95% Relative Humidity, non condensing (operating and storage)
- altitude (operating):
- -1,000 to 50,000 feet (-305 to 15,240 metres)
- ruggedized and commercial air-cooled versions, see separate
datasheets:-
- rear plug compatible
- air-cooled: XM 403/x33-RA (planned)
- commercial: XM 403/x33 (available)
Mechanical Specification
- single size CMC (Common Mezzanine Card) 74mm x 149mm
- 10mm height stack module
- operating shock (VITA 47, conduction-cooled):
- 40g, 11ms, ½ sine
- operating random vibration (VITA 47 Class V3):
- PSD increasing at +3dB/octave (5Hz to 100Hz)
- PSD = 0.1 g2/Hz (100Hz to 1kHz)
- PSD decreasing at -6dB/octave (1kHz to 2kHz)
-
(PSD = Power Spectral Density)