Specification Sheet: XP A40/x03
Intel® AtomTM Processor XMC/PMC Module
(click to view Ruggedized Air-Cooled or Rugged Conduction-Cooled)
Central Processor
- 1.6 GHz Intel® Atom™ processor Z530:-
- 45nm process technology
- soldered to board
- 512 Kbytes of secondary (L2) on-die cache
- Intel Hyper-Threading technology supporting 2 execution threads
- Intel® Virtualization Technology
- no CPU fan
- micro Flip-Chip Ball Grid Array package
- utlizes Intel® System Controller Hub US15W (SCH)
- ultra-low power chipset and I/O
SDRAM
- up to 2 Gbytes soldered DDR2-533 SDRAM
- accessible from processor and base board
XMC or PMC Interface
- option for XMC interface:-
- via PCI Express switch from SCH
- soft-switched Transparent/Non-Transparent Hub option
- option for PMC interface:-
- supports 32/64-bit, 33/66MHz PCI bus
- supports 64-bit PCI-X bus up to 133MHz
- 3.3V signaling; 5V tolerant
- supports monarch and non-monarch operation on the PMC version
- supports Root Complex and Endpoint operation on XMC version
- supports DMA via XMC/PMC host interface
- rear I/O via PMC Pn4 rear I/O connector for all options (no XMC Pn6 rear connector)
Mass Storage Interface
- EIDE (ATA-100) interface for on-board 4 Gbytes bootable NAND Flash
Ethernet Interfaces
- 2 x channels:-
- supporting 10 Base-T, 100 Base-TX, 1000 Base-T
- implemented by 2 x Intel® 82574L
- optional on-board magnetics via Pn4 rear connector
- 1 x channel via Pn4 rear I/O connector
- 1 x channel switched between front panel and Pn4 rear I/O connector
Flash EPROM
- 4 Mbytes SPI Flash EPROM for BIOS and self-test firmware
Graphics Interface
- implemented by the Intel® US51W SCH
- video RAM shared with main memory
- DVI-D output via Pn4 rear I/O connector:-
- resolutions up to 1600x1200 @ 16M colors
- support for Microsoft® DirectX
- support for OpenGL 2.0 on Microsoft® Windows® and Linux®
Serial Interfaces
- 2 x serial ports:-
- 1 x switched between front panel (RS232 mode) and Pn4 rear I/O connector (RS232/RS422/RS485 mode)
- 1 x fixed via Pn4 rear I/O connector (RS232/RS422/RS485 mode)
- 16550 compatible UARTS
Other Peripheral Interfaces
- PC Real-Time Clock (no on-board battery)
- 4 x USB 2.0 interfaces:-
- 1 via front panel
- 3 via Pn4 rear I/O connector
- legacy speaker output
- high speed CANbus controller:-
- up to 1 Mbps
- 3 x GPIO pins via Pn4 rear I/O connector:-
- processor interrupt capability
Firmware Support
- Phoenix® TrustedCore BIOS
- comprehensive Power-On Self-Test (POST)
- USB boot capability
- LAN boot (PXE) firmware included
Software Support
- support for Linux®, Windows® XP Embedded, Windows® XP, QNX® and VxWorks®
Electrical Specification
- PMC option power supply requirements:-
- +5V @ 2.0A (typical with 1 Gbyte SDRAM);
- XMC option power supply requirements:-
- +5V @ 1.8A (typical with 1 Gbyte SDRAM);
- +12V @ 0.8A (typical with 1 Gbyte SDRAM);
- all voltages +5% / -5%
- board power management capability under software control
Safety
- PCB (PWB) manufactured with flammability rating of 94V-0
Environmental Specification
- operating temperatures:-
- 0°C to +55°C (N series)
- -25°C to +70°C (E series)
- -40°C to +85°C (K series)
- 5% to 95% Relative Humidity, non condensing (operating):-
- K-Series includes humidity sealant
- -40°C to +85°C (storage)
- 5% to 95% Relative Humidity, non condensing (storage)
- ruggedized air-cooled and conduction-cooled versions planned, see
separate datasheets:-
- rear plug compatible
- air-cooled: XP A40/x03-RA
- conduction-cooled: XP A40/x03-RC
Mechanical Specification
- single-width CMC (Common Mezzanine Card) IEEE 1386 form factor: (74mm x 149mm)
- 10mm height stack module