PMC INTERFACES

• 2 x PMC sites and for both sites:-

  • I/O via front panel, via P2 for site 1 and optionally via P0 for site 2

  • 32/64-bit and 33/66 MHz PCI operation

  • 3.3V PCI signaling only

• 64 I/O signals via optional P0 connector

• 64 I/O signals via P2 connector

• I/O pin mapping compliant with ANSI/VITA 35-2000 P4V0-64 & P4V2-64ac PMC I/O wiring standards

• carrier provides 3.3V supply

• utilizes PCI 3.0 electrical specification

• utilizes PCI logical layer specification

• complies with CMC (Common Mezzanine Card) standard (IEEE P1386)

AD CR3/PMC CARRIER INTERFACE

• connects to the host processor board using either PMC or XMC adaptor:-

  • PMC interface at up to 64-bit/66MHz

  • XMC PCI Express™ (PCI-E) interface at up to x4 PCI-E

  • utilizes PMC/XMC site on host board

• carrier uses flexible cable connection with either PMC or XMC adaptor:-

  • uses x4 PCI-E cable connection

  • boards are located in chassis together, then pushed into backplane separately

  • easier to insert and eject

COMPATIBLE HOST BOARDS

• example host processor boards with XMC interface:-

  • VX 405/04x

• example host processor boards with PMC interface:-

  • VP 347/02x

  • VP 345/02x

  • VP 337/02x

  • VP 335/02x

  • VP 317/02x

  • VP 315/02x

EIDE INTERFACE

• extends host board's EIDE interface:-

  • uses host board's EIDE connector

• example host boards with compatible EIDE connector:-

  • VP 337/02x

  • VP 335/02x

  • VP 317/02x

  • VP 315/02x

• single channel for up to two devices (master and slave)

  • on-board disk drive and CompactFlash

• EIDE interface can be fully used in conjunction with both PMC sites

SOFTWARE SUPPORT

• carrier features standard PCI-PCI bridge(s):-

  • PMC modules appear on additional PCI bus

• compatible with various operating systems, for example VxWorks, Windows XP, Windows 2000 or Linux

ENVIRONMENTAL SPECIFICATION

• compatible with host boards operating at:-

  • 0°C to +55°C (N-Series)

  • -25°C to +70°C (E-Series)

  • -40°C to +85°C (K-Series)

• 10% to 90% Relative Humidity non-condensing (operating)

  • K-Series includes humidity sealant

• -40°C to +85°C (storage)

• 10% to 90% Relative Humidity non-condensing (storage)

ELECTRICAL SPECIFICATION

• all voltages to be within  ±5%

• power taken from VME bus P1 connector

• 1.2A (maximum) current consumption at +5V

• 0.0A current consumption at +12V

• 0.0A current consumption at -12V

MECHANICAL SPECIFICATION

• utilizes a single VME slot

• has a VME front panel:-

  • VME 6U dimensions

• shock:
  20g, 11ms, ½ sine (operating);
  30g, 11ms, ½ sine (non-operating)

• vibration:
  5Hz-2000Hz at 2g, 0.38mm peak displacement (operating);
  5Hz-2000Hz at 5g, 0.76mm peak displacement (non-operating)