|
ETHERNET
INTERFACE
- supports
10BaseT and 100BaseTx for UTP CAT5 via RJ45 connector on
Transition Module’s front panel
- MII (Media
Independent Interface) is provided on PIM A for other
Ethernet interfaces (PIM is a PMC Interface Module)
EIDE
INTERFACE
- supports
Ultra-DMA 33 interface via 40-way header
- on board
CompactFlash®
socket
SERIAL
INTERFACES
- 9-way D type
connector for COM2 via Transition Module’s front panel
- COM1 and COM2
accessed via PIM B
USB
INTERFACES
- USB0 is
accessed via TM’s front panel
- USB1 is
accessed via PIM B
PARALLEL
PRINTER PORT
FLOPPY
DISK INTERFACE
- accessed via
34-way header on Transition Module
|
|
OTHER
INTERFACES
- PC speaker,
external battery and power status via 10-way header
- general
purpose I/O including a relay output via 14-way header on
Transition Module
- 6 user
definable status switches
- keyboard and
mouse accessed via 10-way header on Transition Module or via PIM B
ELECTRICAL
SPECIFICATION (no CompactFlash Module)
- all voltages
to be within ±5%
- +5V@0.2A;
+3.3V@0.01A; +12V@0.0A; -12V@0.0A with no active PIMs
- add 0.1A
(typical) at 5V for CompactFlash® or 0.33A for IBM®
Microdrive™
ENVIRONMENTAL
SPECIFICATION
- 0°C to +55°C
(operating); -40°C to +70°C (storage)
- 10% to 90%
Relative Humidity (operating)
- 10% to 90%
Relative Humidity (storage)
MECHANICAL
SPECIFICATION
- 6U
form-factor: 9.2" x 3.2" (233.35mm x 80 mm)
- single-slot:
4HP 0.8" (20.3mm)
- connectors:
IEC-1076-4-101 for J3, J4 and J5
- shock: 5g/6ms
- vibration: 1g
(5Hz to 500Hz)
|
