Specification Sheet: AD PP4/002

- Rear Panel I/O Transition Module for CompactPCI^®

ETHERNET INTERFACE

•  two channels

• supports 10BaseT,100BaseTx and 1000BaseT for UTP CAT5 via RJ45 connectors on front panel

• signaling can be routed to transition module’s front panel or PICMG® 2.16 Packet Switching Backplane using the onboard switches

EIDE INTERFACE

SERIAL ATA150

• 2 x SATA150 interfaces via onboard header

  • transfer rates up to 150Mbytes/s

SCSI

• 68-way high density D-Type on front panel

• 68-way high density vertical D-Type connector on-board

• supports modes up to Ultra-2 Wide SCSI

FLOPPY DISK INTERFACE

• via 34-way header on board

USB INTERFACE

• both accessed via USB connectors and one also via 4-way header

SERIAL INTERFACE

• 9-way D-type connector for COM1

• 10-way header for COM2

• optional 9-way D-type connector for COM2
  (replaces DVI-I connector)

GRAPHICS INTERFACE

• supports an optional DVI-I connector:-

  • supports an analog VGA (DVI-A) interface for driving CRT displays

  • supports a DVI-D interface for driving TFT flat panels

  • connector on the front panel

• not available when COM2 9-way D-type connector fitted

OTHER INTERFACES

• PC speaker via 5-way header

• General Purpose I/O interface via 5-way header

• keyboard and mouse via a single circular mini DIN connector

• system fan monitor via 3-way header

ELECTRICAL SPECIFICATION

• all voltages to be within ±5%

• +5V@0.2A - quiescent current; +3.3V@0.09A; +12V@0.0A;
  -12V@0.0A

ENVIRONMENTAL SPECIFICATION

• operating temperatures

  • 0°C to +55°C (N-Series)

  • -25°C to +70°C (E-Series, CompactFlash)

  • -40°C to +85°C (K-Series, CompactFlash)

• 10% to 90% Relative Humidity, non-condensing (operating):-

  • K-Series includes humidity sealant

• -40°C to +85°C (storage)

• 10% to 90% Relative Humidity, non-condensing (storage)

MECHANICAL SPECIFICATION

• 6U form-factor: 9.2" x 3.2" (233.35mm x 80 mm)

• single-slot: 0.8" (20.3mm)

• connectors: IEC-1076-4-101 for J3 and J5

• shock:

  • 20g, 11ms, ½ sine (operating);

  • 30g, 11ms, ½ sine (non-operating)

• vibration:

  • 5Hz-2000Hz at 2g, 0.38mm peak displacement (operating);

  • 5Hz-2000Hz at 5g, 0.76mm peak displacement (non-operating)