Home
 News
 Products
 Sales
 Links
 About Us
 Quality
 Careers
 Search
 
Sign up here to receive our color brochure or regular newsletter
 
Copyright © 2008
Concurrent  Technologies
Trademark,  Legal &  Privacy.

 

Specification Sheet: AD PP4/002-U
 Rear Panel I/O Transition Module for CompactPCI®

  

ETHERNET INTERFACE

  •  two channels

  • supports 10BaseT,100BaseTx and 1000BaseT for UTP CAT5 via RJ45 connectors on front panel

  • signaling can be routed to transition module’s front panel or PICMG® 2.16 Packet Switching Backplane using the onboard switches

EIDE INTERFACE

  • supports up to Ultra-DMA 100 speeds via 40-way header

  • connectors for either:-

  • 1 x CompactFlash (N, E, K-Series)

  • 1.8 inch Hard Disk Drive fitted (N-Series)

    •

    • SERIAL ATA150

    • 2 x SATA150 interfaces via onboard header

      • transfer rates up to 150Mbytes/s

    SCSI

    • 68-way high density D-Type on front panel

    • 68-way high density vertical D-Type connector on-board

    • supports modes up to Ultra-2 Wide SCSI

    FLOPPY DISK INTERFACE

    • via 34-way header on board

    USB INTERFACE

    • both accessed via USB connectors and one also via 4-way header

    SERIAL INTERFACE

    • 9-way D-type connector for COM1

    • 10-way header for COM2

    • optional 9-way D-type connector for COM2
      (replaces DVI-I connector)

    		  

    GRAPHICS INTERFACE

    • supports an optional DVI-I connector:-

      • supports an analog VGA (DVI-A) interface for driving CRT displays

      • supports a DVI-D interface for driving TFT flat panels

      • connector on the front panel

    • not available when COM2 9-way D-type connector fitted

    OTHER INTERFACES

    • PC speaker via 5-way header

    • General Purpose I/O interface via 5-way header

    • keyboard and mouse via a single circular mini DIN connector

    • system fan monitor via 3-way header

    ELECTRICAL SPECIFICATION

    • all voltages to be within ±5%

    • +5V@0.2A - quiescent current; +3.3V@0.09A; +12V@0.0A;
      -12V@0.0A

    ENVIRONMENTAL SPECIFICATION

    • operating temperatures

      • 0°C to +55°C (N-Series)

      • -25°C to +70°C (E-Series, CompactFlash)

      • -40°C to +85°C (K-Series, CompactFlash)

    • 10% to 90% Relative Humidity, non-condensing (operating):-

      • K-Series includes humidity sealant

    • -40°C to +85°C (storage)

    • 10% to 90% Relative Humidity, non-condensing (storage)

    MECHANICAL SPECIFICATION

    • 6U form-factor: 9.2" x 3.2" (233.35mm x 80 mm)

    • single-slot: 0.8" (20.3mm)

    • connectors: IEC-1076-4-101 for J3 and J5

    • shock:

      • 20g, 11ms, ˝ sine (operating);

      • 30g, 11ms, ˝ sine (non-operating)

    • vibration:

      • 5Hz-2000Hz at 2g, 0.38mm peak displacement (operating);

      • 5Hz-2000Hz at 5g, 0.76mm peak displacement (non-operating)