Serial ATA150

• 2 x SATA150 interfaces via 2 onboard standard SATA headers:-

  • transfer rates up to 150Mbytes/s

USB Interfaces

• 2 x USB interfaces accessed via 26-way high density connector on front panel:-

  • available via two USB connectors on
    CB 26D/124-10 splitter cable

Serial Interface

• 4-way header for COM1:-

  • RS232 signal level

  • supports Rx/Tx only

• COM2 accessed via 26-way high density connector on front panel:-

  • RS232 or RS422/RS485 signal levels

  • supports Rx, Tx, CTS, RTS, DSR, DTR, DCD and RI signals

  • available via a 9-way (COM) connector on CB 26D/124-10 splitter cable

Ethernet Interfaces

• 2 x RJ45 connectors on front panel:-

  • supports 10Base-T, 100Base-Tx and 1000Base-T for UTP CAT5

XMC Interface

• 8-bits of I/O accessed via 26-way high density connector on front panel:-

  • available via a 15-way (VGA) D-type connector on CB 26D/124-10 splitter cable

Other Interfaces

• PC speaker via 5-way header

• 4 x General Purpose I/O signals via 5-way header

• 3V battery for processor NVRAM backup

Other Interfaces

• PC speaker via 5-way header

• 4 x General Purpose I/O signals via 5-way header

• 3V battery for processor NVRAM backup

Electrical Specification

• all voltages to be within ±5%

• +5V@0.15A; +3.3V@0.0A; +12V@0.0A; -12V@0.0A

Environmental Specification

• operating temperatures:-

  • 0°C to +55°C (N-Series)

  • -25°C to +70°C (E-Series)

  • -40°C to +85°C (K-Series)

• 10% to 90% Relative Humidity, non-condensing (operating):-

  • K-Series includes humidity sealant

• -40°C to +85°C (storage)

• 10% to 90% Relative Humidity, non-condensing (storage)

• ruggedized air-cooled version also available:-

  • see separate AD TP1/002-RA datasheet

 Mechanical Specification

• 3U form-factor:- 3.9" x 3.2"
  (99mm x 80 mm)

• single-slot: 0.8" (20.3mm)

• connector: IEC-1076-4-101 for J2

• shock:
  20g, 11ms, ½ sine (operating);
  30g, 11ms, ½ sine (non-operating)

• vibration:
  5Hz-2000Hz at 2g, 0.38mm peak displacement (operating);
  5Hz-2000Hz at 5g, 0.76mm peak displacement (non-operating)