CENTRAL PROCESSOR

• 2.0 GHz GHz Dual-Core Intel® Xeon® LV processor or 1.66 GHz Dual-Core Intel® Xeon® ULV processor:-

  • uses mFC-PGA 478 (micro Flip-Chip Pin Grid Array) package

  • 667 MHz Front Side Bus (FSB)

  • 2 Mbytes of shared secondary (L2) on-die cache

  • no CPU fan

• utilizes 64-bit Intel® 3100 server chipset:-

  • single chip chipset with integrated memory and I/O controllers

• provision for XDP debug port

DRAM

• supporting up to 16 Gbytes DDR2-400 ECC SDRAM:-

  • up to 16 Gbytes soldered on-board

  • single-bit error correction

  • gives a peak bandwidth of 3.2 Gbytes/s

• accessible from processor and AMC connector

PICMG® AdvancedMC™ INTERFACES

• hot swap compliant to AMC.0

• x8 PCI Express® fabric connection:-

  • AMC.1 Type 8

  • transfer rate up to 4 Gbytes/s

  • supported by Enhanced DMA (E-DMA) in the Intel server chipset MCH

  • can be used as two x4 interfaces in dual redundant fabric systems

• rear I/O compliant to AMC.1 specification

HARD DISK INTERFACES

• Serial ATA150:-

  • AMC.3 Type S2

  • four channel support via AMC connector

  • transfer rate up to 150 Mbytes/s

• implemented by Intel server chipset

ETHERNET INTERFACES

• dual Gigabit Ethernet channels:-

  • AMC.2 Type E2

  • supporting Serdes type 1000BX via AMC connector

• implemented by Intel® 82571EB LAN Controller via x4 PCI Express serial bus

GRAPHICS INTERFACE

• implemented by Silicon Motion SM722 & Silicon Image Sil164 providing:-

  • digital & analog graphics

  • 8 Mbytes video memory

  • resolutions up to 1280 x 1024; supporting up to 16M colors

  • digital & analog SXGA accessed via front panel DVI-I connector

SERIAL INTERFACES

• 2 x RS232 serial channels:-

  • 1 channel via 9-way D-type front panel connector

  • 1 channel via AMC connector

• 16550 compatible UART

• modem control signals supported:-

  • front channel supports RI, CTS, RTS, DSR, DTR and DCD

  • rear channel supports CTS and RTS only

OTHER PERIPHERAL INTERFACES

• PC-compatible Real Time Clock (Year 2000 compliant)

• watchdog timer

• 1 x 32-bit Long Duration Timer with processor interrupt capability

• CPU temperature monitor; voltages monitor:-

  • all accessible via IPMI

• 4 x USB 2.0 (Universal Serial Bus) interfaces:-

  • 2 channels via front panel

  • 2 channels via AMC connector

IPMI

• IPMI Version 1.5 according to AMC.0

• on-board BMC (Baseboard Management Controller)

• supports 8 Kbytes of non-volatile memory

FLASH EPROM

• 1 Mbyte of BIOS Flash EPROM - 8-bits wide

FIRMWARE SUPPORT

• Phoenix® TrustedCore™ Server

• comprehensive Power-On Self-Test (POST)

• LAN boot firmware included

SOFTWARE SUPPORT

• support for Linux®, Windows® 2000, Windows® Server 2003, Windows® XP, Windows®  XP Embedded and QNX®

ELECTRICAL SPECIFICATION

• +12V@3.3A; ±2V (typical at 2.0 GHz with 2 Gbytes DRAM)

• +3.3V@0.01A; ±5%

SAFETY

• PCB (PWB) manufactured with flammability rating of 94V-0

ENVIRONMENTAL SPECIFICATION

• operating temperature:-

  • 0°C to +55°C (N-Series)

• 10% to 90% Relative Humidity, non-condensing (operating)

• -40°C to +85°C (storage)

• 10% to 90% Relative Humidity, non-condensing (storage)

MECHANICAL SPECIFICATION

• AMC.0 double-width full-height form-factor: 180.6mm x 148.5mm (7.1 inches x 5.8 inches)