|
CENTRAL PROCESSOR
-
2.16 GHz Intel® Core™ 2 Duo
processor T7400 or 1.5 GHz Intel® Core™ 2 Duo processor
L7400:-
-
using a
mFC-BGA
478 (micro Flip-Chip Ball Grid Array) package
-
64 Kbytes of primary (L1) on-die
cache
-
4 Mbytes of shared secondary
(L2) on-die cache
-
667 MHz Front Side Bus (FSB)
-
Intel®
64 (or Intel® EM64T) 64-bit computing support
-
no CPU fan; low power processor
-
utilizes 64-bit Intel® 3100 server
chipset:-
-
provision for XDP debug port
DRAM
PICMG® AdvancedMC™
INTERFACES
-
hot swap compliant to AMC.0
-
x8 PCI Express® fabric
connection:-
-
AMC.1 Type 8
-
transfer rate up to 4 Gbytes/s
-
supported by Enhanced DMA
(E-DMA) in the Intel server chipset MCH
-
can be used as two x4 interfaces
in dual redundant fabric systems
-
external or on-board fabric
clock support
-
rear I/O compliant to AMC.1
specification
STORAGE INTERFACES
ETHERNET INTERFACES
SERIAL INTERFACES
|
|
FLASH EPROM
FIRMWARE SUPPORT
-
Phoenix® TrustedCore™ Server
-
comprehensive Power-On Self-Test
(POST)
-
LAN boot firmware included
SOFTWARE SUPPORT
-
support for Linux®, Windows®
Server 2003, Windows® XP, Windows® XP Embedded,
Windows® 2000 and QNX®
OTHER PERIPHERAL
INTERFACES
-
PC-compatible Real Time Clock
(Year 2000 compliant)
-
watchdog timer
-
1 x 35-bit Long Duration Timer
with processor interrupt capability
-
CPU temperature monitor; voltages
monitor:-
-
4 x USB 2.0 (Universal Serial Bus)
interfaces:-
-
1 channel via front panel
-
2 channels via AMC connector
-
1 channel supports USB Flash
Disk Module
IPMI
-
IPMI Version 1.5 according to
AMC.0
-
on-board BMC (Baseboard Management
Controller)
-
supports 8 Kbytes of non-volatile
memory
ELECTRICAL
SPECIFICATION
-
+3.3V@TBD A; ±5%
-
+12V@TBD A; ±2V
SAFETY
ENVIRONMENTAL
SPECIFICATION
-
operating temperature:-
-
10% to 90% Relative Humidity,
non-condensing (operating)
-
-40°C to +85°C (storage)
-
10% to 90% Relative Humidity,
non-condensing (storage)
MECHANICAL
SPECIFICATION
- AMC.0
single-width full-height form-factor: 180.6mm x 73.5mm (7.1
inches x 2.9 inches)
|