GRAPHICS PROCESSOR

• utilizes Silicon Motion™ SM722 3D/2D dual display controller, which provides:-

  • dual display capability

  • 24-bit true color

  • picture rotation of 90°, 180° or 270°

  • embedded 8 Mbytes DDR SDRAM

  • integrated 235MHz RAMDAC

  • 128-bit graphics engine

  • hardware accelerated support for Microsoft® DirectX® 9

  • supports OpenGL 2.0

  • PCI interface

CRT INTERFACE

• up to 1280 x 1024 pixels, 24-bit color @ 85Hz refresh rate

• supports RGB displays via DVI-I connector

• supplied with a DVI-I to HD15 adaptor for standard VGA connectors (CB DVI/121-00)

FLAT PANEL INTERFACE

• PanelLink® interface provide by Silicon Image Sil164 utilizing Transition Minimized Differential Signalling (TMDS):-

  • accessed via front panel DVI-I connector

• supports active matrix (TFT) and passive (DSTN) panels

• up to 1280 x 1024 pixels, 24-bit color @ 60Hz refresh rate

• supports twisted-pair cable, up to 5 meters in length

DUAL DISPLAYS

• DFP and CRT displays can be driven simultaneously with:-

  • the same resolution

  • the same image

  • the same or different refresh rate

• dependent on operating system software

• maximum recommended resolution:-

  • 1024 x 768 pixels

  • 24-bit color depth for both displays

MASS STORAGE

• supports optional on-board SATA hard disk:-

  • AMC.3 Type S2

  • transfer rate up to 150 Mbytes/s

  • connection on Port 2

PICMG® ADVANCEDMC™ INTERFACES

• hot swap compliant to AMC.0

• x1 PCI Express® fabric connection:-

  • AMC.1 Type 1

  • connection on Port 4

  • transfer rate up to 2.5 Gbytes/s

  • connects to SM722 via PCI bridge

BIOS EPROMs

• 512 Kbit parallel Flash for video BIOS

IPMI

• IPMI Version 1.5 according to AMC.0

• on-board MMC (Module Management Controller)

• supports 8 Kbytes of non-volatile memory

SOFTWARE SUPPORT

• support for Windows® 2000,  Windows® XP,
  Windows® XP Embedded, Linux® and QNX®

ELECTRICAL SPECIFICATION

• requires 3.3V and 12V supplies

• +3.3V @ 0.1 A; +/-5% (max)

• +12V @ 0.1 A; +/-2V (typical, without HDD)

ENVIRONMENTAL SPECIFICATION

• operating temperatures:-

  • 5°C to +40°C (N-Series, with HDD fitted)

  • 0°C to +55°C (N-Series, without HDD)

  • -25°C to +70°C (E-Series, without HDD)

  • -40°C to +85°C (K-Series, without HDD)

• 10% to 90% Relative Humidity non condensing (operating)

• -40°C to +85°C (storage)

• 10% to 90% Relative Humidity, non-condensing (storage)

MECHANICAL SPECIFICATION

• AMC.0 single-width full height form-factor: 180.6mm x 73.5mm (7.1 inches x 2.9 inches):-

  • mid-height version available

• typical shock:-
  HDD:        
  15g, 11ms, ½ sine (operating);
  120g, 11ms, ½ sine (non-operating)

• typical vibration:-
  HDD:
  5Hz-500Hz at 0.67g random, 1g swept sine (operating);
  5Hz-500Hz at 3g random, 5g swept sine (non-operating)