|
Mass Storage
Compatible AMC Boards
IPMI
-
IPMI Version 1.5 according to
AMC.0
-
on-board BMC (Baseboard Management
Controller)
-
supports 8 Kbytes of non-volatile
memory
-
IPMI management support with
E-Keying.
Software Support
Electrical Specification
-
+3.3V@0.1A; ±5%
-
+12V@0.5A; ±2V (max, at startup)
-
+12V@0.2A; ±2V (typical, with
drive active)
-
all current specifications
dependent on hard disk drive fitted
|
|
Environmental
Specification
(Hard Disk Version)
-
all specifications dependent on
hard disk drive
-
+5°C to +55°C (operating)
-
10% to 80% Relative Humidity, non
condensing (operating)
-
-25°C to +65°C (storage)
-
10% to 90% Relative Humidity, non
condensing (storage)
-
operating change rate <10°C/ hour
-
storage temperature change rate
<20°C/ hour
Environmental
Specification
(Compact Flash Version)
-
operating temperatures:-
-
10% to 90% Relative Humidity, non
condensing (operating):-
-
-40°C to +85°C (storage)
-
10% to 90% Relative Humidity, non
condensing (storage)
-
operating change rate <10°C/ hour
-
storage temperature change rate
<20°C/ hour
Mechanical Specification
-
compliant with AMC.0 Advanced
Mezzanine Card Base Specification:-
-
options for panel height:-
-
also available as a double width
board:-
|