Home
 News
 Products
 Sales
 Links
 About Us
 Quality
 Careers
 Search

 
Sign up here to receive our color brochure or regular newsletter
 
Copyright © 2008
Concurrent  Technologies
Trademark Legal
Privacy.

 


Specification Sheet: CL PMC/551


- Dual Channel PMC Ethernet Adaptor


ETHERNET INTERFACES

  • single-Chip Intel® 82551QM Ethernet controller per channel, includes enhanced IP Protocol support:-

    • TCP, UDP, IP checksum offload

    • received checksum verification

  • supports ISO 8802-3 (IEEE 802.3 and 802.3u) Ethernet standards

  • high-performance 32-bit Bus Master architecture with integrated DMA buffer Management Unit for low CPU and Bus utilization

  • full-duplex operation for increased network bandwidth

  • individual transmit and receive FIFOs provide frame buffering for improved performance and supports the following features:-

    • automatic retransmission

    • automatic receive stripping and transmit padding

    • (individually programmable) Checksum Calculation

    • automatic runt frame rejection

    • automatic selection of received collision frames

  • provision for Boot EPROM for diskless node applications

  • connection via standard RJ45 connectors

PMC (PCI MEZZANINE CARD) INTERFACE

  • Peripheral Component Interconnect (PCI) local bus implemented using an Intel® 21152 transparent bridge

  • direct interface to the PCI local bus (Revision 2.1 compliant)

  • complies with PCI Protocol Specification

  • complies with PCI Electrical Specification

  • supports PCI clock rates at 33MHz

  • supports 3.3V or 5V signaling

  • 32-bit interface

  • bus master capability

  • base address and interrupt selection software configurable

 

SOFTWARE

  • Software support for VxWorks®, Windows NT® 4.0, Windows 2000® , Windows® XP, Windows® XP Embedded, and UnixWare®

BOOT EPROM

  • 32-pin PLCC JEDEC socket, 8-bits wide:-

    • supports a 29F010 or 29F040 device

    • in-circuit programmable for BIOS updates

ELECTRICAL SPECIFICATION

  • all voltages to be within ±5%

  • 0.7A (typical) current consumption at 5V

  • +12V and -12V not utilized

ENVIRONMENTAL SPECIFICATION

  • 0°C to +55°C (operating)
  • 10% to 90% Relative Humidity, non condensing (operating)
  • -40°C to +70°C (storage)
  • 10% to 90% Relative Humidity, non-condensing (storage )

MECHANICAL SPECIFICATION

  • single size CMC (Common Mezzanine Card) 75mm x 150mm

  • 10mm height stack module