Gigabit Ethernet Interface
- 2 x 1000Base-SX or 1000Base-LX:-
- accessible via 2 x SFP LC connectors on front panel
- implemented by Intel® 82546GB Gigabit Ethernet controller:-
- supports IEEE 802.3z for 1000Base-SX over 850nm Multi-Mode fiber
- supports optional 1000Base-LX connections using 1310nm Single-Mode fiber
- supports Jumbo frames
- individual MAC and frame Controllers supporting the following features:-
- 64 Kbyte transmit and receive FIFOs for each port
- transmit and receive IP, TCP and UDP checksum off-loading
- transmit TCP segmentation
- automatic retransmission
- automatic receive stripping and transmit padding (individually programmable)
- automatic runt frame rejection
- PMC Interface complies with PCI Protocol Specification 2.2 including:-
- PCI clock rates at 33MHz and 66MHz, and PCI-X rates up to 133MHz
- 32-bit and 64-bit interface
- 3.3V and 5V signaling level compatible
- bus mastering capability
BIOS EPROM
- 8-bit wide 512 Kbyte EPROM
- 32-pin PLCC JEDEC socket
- PXE BIOS boot firmware installed
|
|
Software
- support for Linux®, Windows® XP, Windows® XPE, Windows® 2000, Windows® Server 2003, Windows® Server 2008, VxWorks®, QNX®, LynxOS® and Solaris®
Electrical Specification
- +5V@1.0A (typical with dual 1000Base-SX operating); +5%
- 3.3V, +12V and -12V not utilized
Environmental Specification
- compatible with PMC host boards operating at:-
- 0°C to +55°C (N-Series)
- -25°C to +70°C (E-Series)
- 5% to 95% Relative Humidity, non-condensing (operating)
- -40°C to +85°C (storage)
- 5% to 95% Relative Humidity, non-condensing (storage)
Mechanical Specification
- for use with VME, VXS and CompactPCI® PMC host boards
- single size CMC (Common Mezzanine Card) 74mm x 149mm
- 10mm height stack module
|
