|
MASS STORAGE
-
supports up to two EIDE devices
-
master (default) EIDE:-
-
slave (default) EIDE options:-
-
ATA5 compatible interface
COMMUNICATION
PORT
-
standard 25-way "D"-type, with
interface options for:-
-
parallel printer or
-
RS232 or
-
RS485/422
-
option depends on VME processor
board features
-
accessed via front panel
COMPATIBLE CPU BOARDS
FLOPPY DISK
ELECTRICAL SPECIFICATION
-
single 5V(±5%) supply requirement
-
less than 2.0A when fully
populated (CD-ROM and floppy disk drive)
-
power provided from P1 connector
-
compatible to
DS MSS/IFP Mass Storage Module
|
|
SOFTWARE SUPPORT
ENVIRONMENTAL SPECIFICATION
-
5°C
to +55°C (operating)
-
10% to 80% Relative Humidity, non
condensing (operating)
-
-25°C to +65°C (storage)
-
10% to 90% Relative Humidity, non
condensing (storage)
-
storage temperature change rate
<20°C/ hour
- operating
change rate <10°C/ hour
MECHANICAL SPECIFICATION
-
6U form-factor
-
single VME slot (without floppy
disk drive); two slots (with floppy disk drive)
-
utilizes a 96-way DIN connector on
P2 for system interfaces
-
utilizes a 96-way DIN connector on
P1 for board’s electrical power
-
typical shock:-
-
HDD:
-
15g, 11ms, ½ sine (operating);
-
120g, 11ms, ½ sine (non-operating)
-
CD/DVD:
-
0.8g vertical, 1.5g horizontal,
11ms, ½ sine (operating);
-
50g, 11ms, ½ sine (non-operating)
-
FDD
-
5g, 11ms, ½
sine (operating);
-
80g, 11ms, ½ sine (non-operating)
vibration:-
-
HDD:
-
5Hz-500Hz at 0.67g random, 1g
swept sine (operating);
-
5Hz-500Hz at 3g random, 5g swept sine (non-operating)
-
CD/DVD:
-
FDD
|