|
MASS STORAGE
-
supports up to two EIDE devices
-
select two of the following EIDE
options:-
-
2·5 inch EIDE Hard Disk Drive
-
slimline EIDE CD-RW/DVD-ROM
-
CompactFlash™ Drive or
Microdrive
-
ATA5 compatible interface
COMMUNICATION PORT
-
standard 25-way "D"-type, with
interface options for:-
-
parallel printer or
-
RS232 or
-
RS485/422
-
option depends on VME processor
board features
-
accessed via front panel
COMPATIBLE VME
BOARDS
SOFTWARE SUPPORT
FLOPPY DISK
|
|
MECHANICAL SPECIFICATION
-
6U form-factor
-
single VME slot (without floppy disk
drive); two slots (with floppy disk drive)
-
utilizes a 96-way DIN connector on
P2 for system interfaces
-
utilizes a 96-way DIN connector on
P1 for board’s electrical power
-
typical shock:-
-
HDD:
-
15g, 11ms, ½ sine (operating);
-
120g, 11ms, ½ sine (non-operating)
-
CD/DVD:
-
0.8g vertical, 1.5g horizontal,
11ms, ½ sine (operating);
-
50g, 11ms, ½ sine (non-operating)
-
FDD:
-
5g, 11ms, ½ sine (operating);
-
80g, 11ms, ½ sine (non-operating)
-
typical vibration:-
-
HDD:
-
5Hz-500Hz at 0.67g random, 1g swept
sine (operating);
-
5Hz-500Hz at 3g random, 5g swept
sine (non-operating)
-
CD/DVD:
-
FDD:
ELECTRICAL
SPECIFICATION
-
single 5V(±5%) supply requirement
-
2.0A (typical, with HDD, CD-ROM and
FDD, the highest power configuration)
-
power provided from P1 connector
ENVIRONMENTAL SPECIFICATION
-
5°C to +55°C (operating)
-
10% to 80% Relative Humidity, non
condensing (operating)
-
-25°C to +65°C (storage)
-
10% to 90% Relative Humidity, non
condensing (storage)
-
storage temperature change rate <20°C/ hour
-
operating change rate
<10°C/ hour
|