|
MASS STORAGE
- supports up to two drives:-
- 2·5 inch EIDE
Hard Disk Drive; and/or
- 1·8 inch or 2·5 inch Solid State Flash
Drive; or,
- additional
2.5 inch EIDE hard Disk Drive; or
- slimline
EIDE CD-ROM
- ATA3 compatible interface
FLOPPY DISK
- integrated 3.5 inch floppy disk drive
- accessed via front panel
PARALLEL PRINTER PORT
- accessed via front panel
- standard 25-way "D"-type
COMPATIBLE CPU BOARDS
- Designed to interface to:-
-
VP 307/01x
-
VP 305/01x
-
VP 110/01x
-
VP 101/01x
-
VP 100/01x
-
VP CP1/P3x
-
VP PSE/P3x
-
VP PSE/C1x
-
VP PMC/P3x
-
VP PMC/C1x
ELECTRICAL SPECIFICATION
- single 5V
(±5%) supply requirement
- less than 2.0A when fully populated
(including CD-ROM)
- power provided from P1 connector
- connection is by way of ribbon cable between
P2 connectors (included with the DS MSS/IFP)
|
|
SOFTWARE SUPPORT
- depends on the
VME processor board
ENVIRONMENTAL SPECIFICATION
- 5°C to +55°C (operating)
- 10% to 80% Relative Humidity (operating)
- -25°C to +65°C (storage)
- 10% to 90% Relative Humidity (storage)
- temperature change rate <20°C/ hour
MECHANICAL SPECIFICATION
|