Graphics Processor
- utilizes Silicon Motion™ SM722 3D/2D dual display controller, which provides:-
- dual display capability
- resolutions up to 1280 x 1024
- 24-bit true color
- picture rotation of 90°, 180° or 270°
- embedded 8 Mbytes DRAM
- integrated 235MHz RAMDAC
- 128-bit graphics engine
- hardware accelerated support for Microsoft® DirectX 9
- supports OpenGL 2.0 under Windows® and Linux®
- PCI bus interface
CRT Interface
- up to 1280 x 1024 pixels, 24-bit color @ 85Hz refresh rate
- supports analog RGB compliant displays:-
- front panel I/O via DVI-I connector
- rear I/O via P4
- front or rear I/O is user selectable
Flat Panel Interface
- PanelLink® interface provided by Silicon Image SiI 164 utilizing TMDS™ (Transition Minimized Differential Signaling):-
- supports active matrix (TFT) and passive (DSTN) panels
- up to 1280 x 1024 pixels @ 60Hz refresh rate
- up to 24-bit color
- supports twisted-pair cable, up to 5 meters in length
- supports Digital Flat Panel (DFP) displays:-
- front panel I/O via DVI-I connector
- rear I/O via P4
- front or rear I/O is user selectable
Dual Display Operation
- DFP and CRT displays can be driven simultaneously with:-
- the same or different images
- the same resolution
- the same or different refresh rate
- dependent on operating system software
- maximum recommended settings:-
- 1024 x 768 pixels for one image and
- 1280 x 1024 for the other
- 16-bit color depth
|
|
PMC Interface
- complies with PCI protocol and electrical specification:-
- 33 MHz, 32-bit PCI bus interface
- supports 3.3V and 5V signaling levels
BIOS EPROM
- 8-bit wide 64 Kbyte Flash EPROM
Software Support
- support for Windows 2000, Windows XP,
- Windows XP Embedded, Linux and QNX
Electrical Specification
- requires 3.3V and 5V supplies
- +5V @ 0.22A; +/-5%
- +3.3V @ 0.4A; +/-5%
- +12V and -12V supplies not utilized
Safety
- PCB (PWB) manufactured with flammability rating of 94V-0
Environmental Specification
- operating temperatures:-
- 0°C to +55°C (N-Series)
- -25°C to +70°C (E-Series)
- -40°C to +85°C (K-Series)
- storage temperatures:-
- Relative Humidity, non condensing (operating and storage):-
- 10% to 90%
- K-Series includes humidity sealant
- ruggedized air-cooled version available:-
- see separate IO PMC/722-RA datasheet
- ruggedized conduction-cooled version available:-
- see separate IO PMC/722-RC datasheet
Mechanical Specification
- single size CMC (Common Mezzanine Card) 74mm x 149mm
- 10mm height stack module
- shock:-
- 20g, 11ms, ½ sine (operating);
- 30g, 11ms, ½ sine (non-operating)
- vibration:-
- 5Hz-2000Hz at 2g, 0.38mm peak displacement (operating);
- 5Hz-2000Hz at 5g, 0.76mm peak displacement (non-operating)
|