CENTRAL PROCESSOR

• 2.0 GHz Intel® Pentium® M processor 760:-

  • 533 MHz Front Side Bus (FSB)

• 1.4 GHz Intel® Pentium® M processor Low Voltage 738:-

  • 400 MHz Front Side Bus (FSB)

• common processor features are:-

  • uses mFC-BGA 479
    (micro Flip-Chip Ball Grid Array) package

  • 64 Kbytes of primary (L1) on-die cache

  • 2 Mbytes of secondary (L2) on-die cache

  • no CPU fan

• utilizes 64-bit Intel® E7520 server chipset:-

  • supports DDR2-400 memory to give a peak bandwidth of 3.2 Gbytes/s

  • uses Intel® 6300ESB I/O Controller Hub

• provision for ITP debug port

DRAM

• supporting up to 2 Gbytes DDR2-400 ECC SDRAM:-

  • up to 2 Gbytes soldered on-board

  • single bit error correction

• accessible from processor AMC connector

PICMG® AdvancedMC™ INTERFACES

• hot swap compliant to AMC.0

• PCI Express® x8 fabric interconnection:-

  • AMC.1 Type 8

  • transfer rate up to 4 Gbytes/s

  • can support dual x4 and dual x1 fabric connections

• rear I/O compliant to AMC.1 specification

HARD DISK INTERFACES

• 2 x Serial ATA150:-

  • AMC.3 Type S2

  • dual channel support via AMC connector

  • transfer rate up to 150 Mbytes/s

• implemented by Intel® 6300ESB ICH

ETHERNET INTERFACES

• 2 x Gigabit Ethernet channels:-

  • AMC.2 Type E2

  • supporting Serdes type 1000Base-BX via AMC connector

• implemented by Intel® 82571EB LAN Controller via PCI-Express x4 serial bus

SERIAL INTERFACES

• 2 x RS232 serial channels:-

  • 1 channel via a 9-way D-type connector on front panel

  • 1 channel via AMC connector

• 16550 compatible UART

• modem control signals supported:-

  • front channel supports RI, CTS, RTS, DSR, DTR and DCD

  • rear channel supports CTS and RTS only

OTHER PERIPHERAL INTERFACES

• PC-compatible Real Time Clock (Year 2000 compliant)

• watchdog timer

• 1 x 32-bit Long Duration Timer with processor interrupt capability

• CPU temperature monitor; voltages monitor:-

  • all accessible via IPMI

• 2 x USB 2.0 (Universal Serial Bus) channels:-

  • 1 channel via front panel

  • 1 channel via AMC connector

IPMI

• IPMI Version 1.5 according to AMC.0

• on-board BMC (Baseboard Management Controller)

• supports 8 Kbytes of non-volatile memory

FLASH EPROMS

• 1 Mbyte of Application Flash EPROM - 8-bits wide

• 1 Mbyte of BIOS Flash EPROM - 8-bits wide

FIRMWARE SUPPORT

• Phoenix® TrustedCore™ Server

• comprehensive Power-On Self-Test (POST)

• LAN boot firmware included

SOFTWARE SUPPORT

• support for Linux®, Windows® 2000, Windows® Server 2003, Windows® XP, Windows®  XP Embedded, QNX® and VxWorks®

ELECTRICAL SPECIFICATION

• +12V@3.4A; ±2V (typical at 2.0 GHz with 1 Gbyte DRAM)

• +3.3V@0.01A; ±5%

SAFETY

• PCB (PWB) manufactured with flammability rating of 94V-0

ENVIRONMENTAL SPECIFICATION

• operating temperature:-

  • 0°C to +55°C (N-Series: up to 2.0 GHz)

  • -25°C to +70°C (E-Series: 1.4 GHz)

• 10% to 90% Relative Humidity, non-condensing (operating)

• -40°C to +85°C (storage)

• 10% to 90% Relative Humidity, non-condensing (storage)

MECHANICAL SPECIFICATION

• AMC.0 single-width full-height form-factor: 180.6mm x 73.5mm (7.1inches x 2.9inches)