Home
 News
 Products
 Sales
 Links
 About Us
 Quality
 Careers
 Search
 
Sign up here to receive our color brochure or regular newsletter
 
Copyright © 2008
Concurrent  Technologies
Trademark,  Legal &  Privacy.

 

Specification Sheet: SC PMC/160-U
 PMC Ultra160 SCSI Adaptor

 

SCSI INTERFACE

  •  many SCSI standards supported:-

    • SPI-3 [Ultra160 SCSI] LVD (160 Mbytes/s) - wide

    • SPI-2 [Wide Ultra2 SCSI] LVD (80 Mbytes/s) - wide

    • SPI-2 [Ultra2 SCSI] LVD (40 Mbytes/s) - narrow

    • SPI [Wide Ultra SCSI] SE (40 Mbytes/s) - wide

    • SPI [Ultra SCSI] SE (20 Mbytes/s) - narrow

    • SCSI-2 [Fast Wide SCSI] SE (20 Mbytes/s) - wide

    • SCSI-2 [Fast SCSI] SE (10 Mbytes/s) - narrow

    • SCSI-2 [Wide SCSI] SE (10 Mbytes/s) - wide

    • SCSI-1 SE (5 Mbytes/s) - narrow

  • narrow (8-bit) or wide (16-bit) single ended or LVD interfaces with auto-sense capability

  • asynchronous and synchronous operation

  • active termination and signal negation

  • CRC (Cyclic Redundancy Check)

  • AIP (Asynchronous Information Protection)

  • SureLINK® Domain Validation

  • Ultra160 SCSI I/O processor provides:-

    • double transition clocking for 160 Mbytes/s throughput on each channel

    • 33/66MHz, 32/64-bit PCI interface

    • theoretical 528 Mbytes/s zero wait state transfer rate with 66MHz/64-bit PCI interface

  • utilizes LSI Logic® 53C1010R for dual channel

  • SCSI I/O connection via:-

    • front panel 68-way HD connector

    • rear I/O P4 PMC connector

  • supports disk, tape and other peripherals

SOFTWARE SUPPORT

  • support for  Windows NT®, Windows® 2000, Windows® XP, Windows® XP Embedded, Linux® ,Solaris, UnixWare and VxWorks®
  

PMC (PCI MEZZANINE CARD) INTERFACE

  • complies with PCI Protocol and Electrical Specifications

  • supports PCI clock rates up to 66MHz

  • 5V or 3.3V signaling interface

  • 32/64-bit interface

  • bus master capability

  • base address and software configurable

BIOS EPROM

  • 512 Kbytes, 8-bits wide Flash (29LV040)

  • 32-pin JEDEC socket

  • standard LSI Logic BIOS Firmware

ELECTRICAL SPECIFICATION

  • requires 3.3V and 5V supplies:-

    • all voltages to be within ±5%

    • power consumption up to 5.4W (excluding SCSI bus requirements)

  • +12V and -12V not utilized

ENVIRONMENTAL SPECIFICATION

  • 0ºC to 55ºC @ 200LFM air flow (ambient operating)

  • 10% to 90% relative humidity (operating and storage)

  • -40ºC to +85ºC (storage)

MECHANICAL SPECIFICATION

  • single size CMC (Common Mezzanine Card) 74mm

  • 10mm height stack module