SAS/SATA INTERFACE

• 4 independently configurable interfaces:-

  • SAS 1.0 at 1.5 Gbits/s and 3.0 Gbits/s

  • SATA 1.0a at 1.5 Gbits/s and 3.0 Gbits/s

• SSP, SMP, STP and SATA protocols

• 2, 3 and 4 lane SAS Wide Ports supported

• up to 2.4 Gbytes/s bandwidth

• drives expanders up to 122 devices

• integrated mirroring and striping RAID options

• I/O connections via front panel SFF 8484 4i connector

ADVANCED I/O CONTROLLER

• utilizes LSI Logic LSISAS1064 serial drive controller

• integrates the ARM926 RISC processor core:-

  • offloads host by managing I/O

  • Fusion-MPT™ architecture

PMC INTERFACE

• complies with PCI Protocol Specifications 3.0

• supports 33 and 66 MHz PCI clock rates:-

  • 3.3V signaling interface

• 32/64-bit interface:-

  • up to 528 Mbytes/s zero wait state transfer rate with 66 MHz/64-bit PCI interface

• bus mastering capability

BOOT FLASH

• 2 Mbytes, 8-bits wide Flash EPROM

• stores SCSI configuration parameters

• in circuit programmable

NVRAM

• 32 Kbytes

• stores integrated RAID journal

• no battery required

SOFTWARE SUPPORT

• support for Windows 2000,
  Windows XP, Windows Server 2003, Linux

ELECTRICAL SPECIFICATION

• requires 3.3V supply only:-

  • all voltages to be within ±5%

  • power consumption less than 5.0W

• 5V, +12V and -12V not utilized

ENVIRONMENTAL SPECIFICATION

• operating temperatures

  • 0ºC to +55ºC (N-Series)

  • -25ºC to +70ºC (E-Series)

  • -40ºC to +85ºC (K-Series)

• 10% to 90% relative humidity (operating and storage)

• -40ºC to +85ºC (storage)

MECHANICAL SPECIFICATION

• single size CMC (Common Mezzanine Card)
  75mm x 150mm

• 10mm height stack module

• IEEE 1386-2001 compliant