Central Processor

• 2.16 GHz Intel® Core™ 2 Duo processor T7400 or 1.5 GHz Intel® Core™ 2 Duo processor L7400:-

  • dual-core processor

  • 4 Mbytes of secondary (L2) on-die cache

  • 667 MHz Front Side Bus

• 1.73 GHz Intel® Celeron® M processor 530:-

  • single-core processor

  • 1 Mbyte of secondary (L2) on-die cache

  • 533 MHz Front Side Bus

• Intel® 64 Technology (64-bit computing)

• uses mFC-BGA 478(micro Flip-Chip Ball Grid Array) package

• utilizes 64-bit Intel® 945GME GMCH

• utilizes Intel® ICH7-R I/O Controller Hub

DRAM

• up to 2 Gbytes DDR2-667 SDRAM:-

  • up to 2 Gbytes via SODIMM socket

  • single channel memory

  • peak bandwidth of up to 5.3 Gbytes/s

• accessible from processor or CompactPCI® bus

OPTIONAL SECOND SLOT BOARDS

• second slot board, two options (see diagram)

• option 1 supports onboard:-

  • PMC/XMC site or 2.5" SATA disk drive

  • CompactFlash site 

• option 2 supports onboard:-

  • SATA disk drive (or external disk drive)

  • CompactFlash site, accessible via front panel

PMC/XMC INTERFACE

• single PMC/XMC site available on an optional second slot board (option 1 in diagram):-

  • 32-bit, 33/66 MHz PCI operation

  • 3.3V and 5V PCI signaling levels

  • XMC (Switched Mezzanine Card) interface supported via x4 PCI Express port

  • I/O via front panel and 64 bits via J2 on optional second slot board

Hard Disk Interfaces

• 4 x Serial ATA300 interfaces:-

  • transfer rate up to 300 Mbytes/s

  • 2 x channels accessible via J2

  • 1 x channel routed to 2.5" SATA disk drive on both types of optional second slot board (uses PMC/XMC site on option 1)

  • 1 x channel routed to a CompactFlash® site on both second slot board options

• 1 x EIDE interface:-

  • supports an on-board CompactFlash® site (type 1) on the single slot base board

Ethernet Interfaces

• up to 2 x channels supporting:-

  • 10 Base-T, 100 Base-TX, 1000 Base-T

  • implemented by 2 x Intel® 82573L via two x1 PCI Express® ports

• 1 x channel accessed via front panel RJ45

• option for one channel accessed via J2

PMC/XMC Interface

• single PMC/XMC site available on optional second slot board:-

  • 32-bit, 33/66 MHz PCI operation

  • 3.3V and 5V PCI signaling levels

  • XMC (Switched Mezzanine Card) interface supported via x4 PCI Express port

  • I/O via front panel and 64 bits via J2 on optional second slot board

Stereo Audio

• AC'97 interface on J2 supports Stereo Audio Codec on optional Rear Transition Module

FLASH EPROM

• 1 Mbyte of BIOS Flash EPROM:-

  • hardware write protect provided

GRAPHICS INTERFACE

• implemented by the Intel® 945GME GMCH

• analog VGA accessed via a 15-way high density connector on front panel:-

  • resolutions up to 2048 x 1536 @ 16M colors

• flat panel supported by a Panel Link interface via J2 connector:-

  • resolutions up to 1600 x 1200 @ 16M colors

SERIAL INTERFACES

• option for 1 x RS232/422/485 serial channel accessed via J2:-

  • supporting RI, CTS, RTS, DSR, DTR and DCD

• 16550 compatible UARTs

• 1 x RS232 serial channel accessed via front panel RJ45 connector and J2:-

  • supporting CTS, RTS, DSR, DTR and DCD

• serial channels are TTL level and are shifted to RS232/422/485 on the RTM

OTHER PERIPHERAL INTERFACES

• PC Real Time Clock (Year 2000 compliant)

• long duration timer; watchdog timer

• legacy speaker interface

• 4 x USB 2.0 interfaces:-

  • 2 channels accessed via J2

  • 2 channels accessed via front panel

• 2 x GPIO signals via J2

COMPACT PCI INTERFACE

• universal signaling support, compliant with PICMG 2.0 R3.0; 3.3V or 5V signaling levels

• 33/66 MHz; 32-bit interface accessed via J1

• operates as a System Slot controller (supporting up to 7 peripheral slots) or operates in a Peripheral Slot

• PICMG 2.1 R2.0 Hot Swap Compliant

• option to disable CompactPCI interface (Satellite Mode):-

  • receives power from CompactPCI bus

  • board can be hot swapped

FIRMWARE SUPPORT

• Phoenix™ TrustedCore BIOS

• Trusted Platform Module (TPM) support

• comprehensive Power-On Self-Test (POST)

• LAN boot firmware included

IPMI

• PICMG 2.9 R1.0 (System Management Specification):-

  • implements the IPMB0 interface

• on-board Baseboard Management Controller

• monitors CPU temperature, voltages and fan

• supports 8 Kbytes of non-volatile memory

SOFTWARE SUPPORT

• supports Linux®, Windows® XP, Windows® XP Embedded, Windows® 2000, Windows® Server 2003,  QNX®, LynxOS®, VxWorks® and Solaris™

ELECTRICAL SPECIFICATION

• +5V@5.2 A (typical with 2 Gbytes DRAM)

• +3.3V@2.7 A

• +12V and -12V not required

• all voltages are tolerant to +5% / -3%

SAFETY

• PCB (PWB) manufactured with flammability rating of 94V-0

ENVIRONMENTAL SPECIFICATION

• operating temperatures:-

  • 0°C to +55°C (N-Series: 2.16 GHz, 1.5 GHz)

  • -25°C to +70°C (E-Series: 1.5 GHz)

  • -40°C to +85°C (K-Series: 1.5 GHz)

• 5% to 95% Relative Humidity, non condensing (operating):-

  • K-Series includes humidity sealant

• -40°C to +85°C (storage)

• 5% to 95% Relative Humidity, non condensing (storage)

MECHANICAL SPECIFICATION

• 3U form-factor: 3.9 inches x 6.3 inches (100mm x 160mm)

• single or dual slot

• connectors: IEC-1076-4-101 for J1-J2

  shock:
  20g, 11ms, ½ sine (operating);
  30g, 11ms, ½ sine (non-operating)

•  vibration:
  5Hz-2000Hz at 2g, 0.38mm peak displacement (operating);
  5Hz-2000Hz at 5g, 0.76mm peak displacement (non-operating)