Home
 News
 Products
 Sales
 Links
 About Us
 Quality
 Careers
 Search
 
Sign up here to receive our color brochure or regular newsletter
 
Copyright © 2008
Concurrent  Technologies
Trademark,  Legal &  Privacy.

 

Specification Sheet: VP 347/02x

  

- 1.8 GHz & 1.4 GHz Intel® Pentium® M Processor based Single Board Computer

CENTRAL PROCESSOR

  • two processor versions available

  • 1.8 GHz Intel® Pentium® M processor 745:-

    • uses mFC-PGA 478
      (micro Flip-Chip Pin Grid Array) package

  • 1.4 GHz Intel® Pentium® M processor Low Voltage 738:-

    • uses mFC-BGA 479
      (micro Flip-Chip Ball Grid Array) package

  • Common processor features are:-

    • 64 Kbytes of primary (L1) on-die cache

    • 2 Mbytes of secondary (L2) on-die cache

    • 400 MHz Front Side Bus (FSB)

    • no CPU fan

  • 1.6 GHz Pentium M processor (1 Mbyte L2 cache) and 1.0 GHz ULV Celeron M (512 Kbytes L2 cache) versions available; see VP 345/02x datasheet

  • utilizes 64-bit Intel® 855GME chipset:-

    • supports 400 MHz bus frequency

    • uses Intel® 6300ESB I/O Controller Hub

  • ITP debug port

DRAM

  • supporting up to 2 Gbytes 333 MHz DDR ECC SDRAM:-

    • up to 1 Gbyte soldered onboard

    • up to 1 Gbyte provided via SODIMM socket (not available on K-Series board)

    • single bit error correction

  • accessible from processor or VME bus

HARD DISK INTERFACES

  • Ultra-SCSI 8-bit and Ultra Wide SCSI 16-bit:-

    • accessed via P2 connector

    • single-ended asynchronous or synchronous, with active termination and signal negation

    • utilizing LSI Logic® 53C1020 SCSI I/O Processor

    • synchronous SCSI data rates up to 40 Mbytes/sec

  • EIDE interface:-

    • accessed via P2 connector

    • supports up to Ultra-DMA 100 for high performance drives

    • two channels (primary and secondary)

    • primary channel is accessible via P2 connector

    • secondary channel can be used for on-board 2.5 inch disk drive or CompactFlash module or Microdrive Type II drive (the board still fits in a single slot). Does not use PMC site

    • connects to an optional Mass Storage Module (DS MSS/IFP, DS MSS/00z)

ETHERNET INTERFACE

  • 2 x channels supporting 10 Base-T, 100 Base-TX, 1000 Base-T:-

    • implemented by Intel® 82546GB LAN Controller via 64-bit PCI bus

  • accessed via front panel RJ45 connectors

GRAPHICS INTERFACE

  •  implemented by the Intel® 855GME GMCH:-

    • resolutions up to 2048 x 1536 @75Hz

    • up to 16M colors

  • analog interface accessed via a front panel connector

  • flat panel supported using DFP via P2 connector (see
    Note 2)

SERIAL INTERFACE

  • 2 x RS232 serial interfaces:-

    • via RJ45 connectors on front panel

    • 16550 compatible UARTs

PMC (PCI MEZZANINE CARD) INTERFACE

  • one PMC slot with I/O via front panel and optionally via P0:-

    • 32/64-bit, 33/66 MHz PCI operation

    • 3.3V or 5V signaling levels

    • still available when EIDE drive option fitted

  • expansion to optional dual PMC carrier board:-

    • using expansion connector (32-bit/33 MHz)

    • or using the baseboard PMC
      site (64-bit/66 MHz)

  

OTHER PERIPHERAL INTERFACES

  • 4 x USB 2.0 (Universal Serial Bus) interfaces:-

    • 1 x USB via front panel

    • 3 x USB via P2 connector (see Note 2)

  • keyboard and mouse interfaces via a single PS/2™ type connector on front panel

  • PC-compatible Real Time Clock (Year 2000 compliant)

  • floppy disk interface via P2 connector

  • parallel printer port interface (ECP, EPP and IEEE1284) via P2 connector

  • watchdog timer

  • 1 x 32-bit Long Duration Timer with processor  interrupt capability

VME INTERFACE

  • implemented by Tundra® Universe II™ device

  • VME Master/Slave

  • A32/A24/A16/D64/D32/D16/D8(EO)/MBLT64

  • fast hardware byte swapping

  • auto system controller detect

  • full interrupter / interrupt handler support

  • bus error interrupt hardware

FLASH EPROM

  • 1 Mbyte of BIOS Flash EPROM

FIRMWARE SUPPORT

  • Phoenix® BIOS

  • comprehensive Power-On Self-Test (POST)

  • LAN boot firmware included

SOFTWARE SUPPORT

  • support for VxWorks®, Windows® NT, Windows® 2000,  Windows® XP, Windows® XP Embedded, RTX®, Linux®, Solaris®, LynxOS®, QNX® and MS-DOS®

ELECTRICAL SPECIFICATION

  • +5V@5.2A (typical at 1.8 GHz with 1 Gbyte DRAM)

  • +12V@0.0A; -12V@0.0A

  • +12V and -12V routed to both PMC sites and PMC expansion connector

ENVIRONMENTAL SPECIFICATION

  • operating temperatures:-

    • 0°C to +55°C (N-Series: 1.8 GHz, 1.4 GHz)

    • -25°C to +70°C (E-Series: 1.4 GHz)

    • -40°C to +85°C (K-Series: 1.4 GHz)

  • 10% to 90% Relative Humidity, non condensing (operating):-

    • K-Series includes humidity sealant

  • -40°C to +85°C (storage)

  • 10% to 90% Relative Humidity, non condensing (storage)

MECHANICAL SPECIFICATION

  • 6U form-factor

  • single slot - width 0.8inch (20.3mm)

  • utilizes 160-way DIN connectors for P1 and P2:-

    • compatible with 96-way DIN connectors

  • optional P0 (for VME64x backplanes only)

  • shock:

    • 20g, 11ms, ˝ sine (operating);

    • 30g, 11ms, ˝ sine (non-operating)

  • vibration:

    • 5Hz-2000Hz at 2g, 0.38mm peak displacement (operating);

    • 5Hz-2000Hz at 5g, 0.76mm peak displacement (non-operating)

Note 1: selected variants are supplied with VME64x handles

Note 2: 5-row backplane is required to provide P2 access to 3 x USB and DFP