CENTRAL PROCESSOR

• 2.16 GHz Intel® Core™ 2 Duo processor T7400:-

  • uses mFC-PGA 478 (micro Flip-Chip Pin Grid Array) package

• 1.5 GHz Intel® Core™ 2 Duo processor L7400:-

  • uses mFC-BGA 478 (micro Flip-Chip Ball Grid Array) package

• common processor features are:-

  • dual-core CPU

  • 667 MHz Front Side Bus

  • 4 Mbytes of secondary (L2) on-die cache

  • 64 Kbytes of primary (L1) on-die cache

  • Intel® 64 Technology (64-bit computing support)

  • no CPU fan

• utilizes Intel® E7520 server class chipset:-

  • uses Intel® 6300ESB I/O Controller Hub

• provision for XDP debug port

DRAM

• supports up to 4 Gbytes DDR2-400 ECC SDRAM:-

  • up to 4 Gbytes soldered on-board

  • up to four bit error correction

  • peak bandwidth of 6.4 Gbytes/s

  • dual channel architecture

• accessible from processor or VME bus

HARD DISK INTERFACES

• 2 x EIDE interfaces:-

  • supports up to Ultra-DMA 100

  • second EIDE interface supports CompactFlash™ carrier with 2 sites (within a single slot)

  • primary channel supports off-board EIDE drives via P2 connector

• 2 x Serial ATA150 interfaces:-

  • transfer rate up to 150 Mbytes/s

  • 1 channel can be used for on-board 2.5 inch SATA disk drive

  • option for 1 channel via P0 (see Note 1)

PMC INTERFACES

• 2 x PMC sites; for both sites:-

  • 32/64-bit, 33/66 MHz PCI/PCI-X

  • XMC (PCI Express® Mezzanine Card) interface supported via x8 PCI Express Link

  • 3.3V or 5V PCI signaling levels

• PMC Site 1 I/O via front panel and P2

• PMC Site 2 I/O via front panel and optional P0 (see Note 1)

• expansion to an optional dual PMC carrier board:-

  • via expansion connector (32-bit/33 MHz)

  • or via baseboard PMC site (64-bit/66 MHz)

ETHERNET INTERFACES

• two interfaces supporting 10 Base-T, 100 Base-TX, 1000Base-T:-

  • implemented by Intel® 82571EB LAN Controller via x4 PCI Express® link

  • both interfaces accessed via optional P0 (see Note 1)

  • 1 channel switchable to front panel RJ45

• support for VITA 31.1:-

  • Gigabit Ethernet for VME64x backplanes

GRAPHICS INTERFACE

• implemented by a Silicon Motion SM722:-

  • 8 Mbytes video memory

  • resolutions up to 1280 x 1024 @ 16M colors

• analog graphics accessed via a 26-way high-density connector on front panel and via optional P0

SERIAL INTERFACES

• 3 x serial channel interfaces:-

  • 1 x RS232 accessed via 26-way high density connector on front panel

  • 2 x RS232/422/485 accessed via P2

• 16550 compatible UART

OTHER PERIPHERAL INTERFACES

• PC-compatible Real Time Clock (Year 2000 compliant)

• 3 x USB 2.0 interfaces:-

  • 1 via a 26-way high-density connector on front panel

  • 1 via P2 connector

  • option for 1 via P0 connector (see Note 1)

• keyboard and mouse interfaces accessed via a 26-way high-density connector on front panel and optionally via P0 connector

• watchdog timer

• 1 x 32-bit Long Duration Timer with processor interrupt capability

FLASH EPROM

• 1 Mbyte of BIOS Flash EPROM

• 64 Mbytes of Application Flash EPROM

SOFTWARE SUPPORT

• support for Linux®, Windows® XP, Windows® XP Embedded, Windows® 2000, RTX®, VxWorks®, QNX®, Solaris™ and LynxOS®

FIRMWARE SUPPORT

• Phoenix® TrustedCore® Server BIOS

• comprehensive Power-On Self-Test (POST)

• LAN boot firmware included

SAFETY

• PCB (PWB) manufactured with flammability rating of 94V-0

VME INTERFACE

• P1 and P2 connectors compatible with VME64x

• implemented using Tundra® Universe II™ device

• VME Master/Slave

• A32/A24/A16/D64/D32/D16/D8(EO)/MBLT64

• fast hardware byte swapping

• auto system controller detect

• full interrupter / interrupt handler support

• bus error interrupt hardware

ELECTRICAL SPECIFICATION

• +5V@9.8A (typical at 2.16 GHz with 4 Gbytes SDRAM)

• +12V@0.0A; -12V@0.0A; 3.3V not required

• +12V and -12V routed to both PMC sites and PMC expansion connector

ENVIRONMENTAL SPECIFICATION

• operating temperatures:-

  • 0°C to +55°C (N-Series: up to 2.16 GHz)

  • -25°C to +70°C (E-Series: 1.5 GHz)

  • -40°C to +85°C (K-Series: 1.5 GHz)

• storage temperature: -40°C to +85°C

• 10% to 90% Relative Humidity, non condensing (operating or storage):-

  • K-Series includes humidity sealant

• ruggedized versions available, see separate datasheets:-

  • conduction cooled (RC-Series: 1.5 GHz)

  • air cooled (RA-Series: 1.5 GHz)

MECHANICAL SPECIFICATION

• 6U form-factor

• single VME64x slot - front panel width 0.8 inch (20.3mm)

• utilizes 160-way connectors for P1 and P2

• optional P0

• IEEE 1101.10 handles

• shock:
  20g, 11ms, ½ sine (operating);
  30g, 11ms, ½ sine (non-operating)

• vibration:
  5Hz-2000Hz at 2g, 0.38mm peak displacement (operating);  
  5Hz-2000Hz at 5g, 0.76mm peak displacement (non-operating)

Note 1: The optional P0 connector supports either PMC Site 2 I/O x64 and 1 x Ethernet or PMC Site 2 I/O x32, SATA, USB and 2 x Ethernet