DUAL PROCESSORS

• dual processors; for each processor:-

  • 1.66 GHz Dual-Core Intel® Xeon® processor ULV

  • uses mFC-PGA 478 (micro Flip-Chip Pin Grid Array) package

  • internal primary (L1) on-die cache

  • 2 Mbytes secondary (L2) shared on-die cache

• no CPU fan required

• utilizes 64-bit Intel® E7520 chipset:-

  • uses Intel® 6300ESB I/O Controller Hub

DRAM

• supports up to 8 Gbytes DDR2-400 ECC SDRAM:-

  • up to 4 Gbytes soldered to board

  • up to 4 Gbytes provided via two 200-pin SODIMM sockets

  • dual channel configuration

  • peak bandwidth of 6.4 Gbytes/s

  • error correction up to 4-bits

• accessible from processors and VME bus

HARD DISK INTERFACES

• EIDE interface:-

  • can be used for an ATA-100 EIDE disk drive or up to 2 CompactFlash™ or Microdrive™ Type II drives in a single slot

• 2 x Serial ATA150 interfaces:-

  • both channels accessible via P2 to a Rear Transition Module (RTM)

  • one channel switchable to on-board SATA disk drive

  • transfer rate up to 150 Mbytes/s

• on-board options occupy the PMC site

ETHERNET INTERFACES

• 4 x channels supporting 10Base-T, 100Base-TX, 1000Base-T

• 2 x front panel interfaces:-

  • implemented by an Intel® 82571EB LAN controller via a x4 PCI Express® link

  • accessed via front panel RJ45 connectors

• 2 x rear interfaces via P0:-

  • implemented by an Intel® 82571EB LAN controller via a x4 PCI Express link

  • support for VITA 31.1 - Gigabit Ethernet for VME64x backplane or support for rear panel RJ45’s to a Rear Transition Module (RTM)

GRAPHICS INTERFACE

• implemented by a Silicon Motion SM722:-

  • 8 Mbytes video memory

  • resolution up to 1280 x 1024 @ 16M colors

• analog interface via front panel connector

• DVI-I interface supported via P2 to an RTM

PMC/XMC INTERFACE

• PMC/XMC shared site:-

  • PMC site supports 32/64-bit, 33/66 MHz PCI and 66 MHz PCI-X™ operation (PCI 3.3V signaling)

  • XMC (PCI Express Mezzanine Card) interface supported via x8 or dual x4 PCI Express Link

• I/O via front panel and via optional P0:-

  • Rear Transition Module supports rear I/O

• expansion to optional dual PMC carrier board (64-bit/66 MHz) via baseboard PMC or XMC site

SERIAL INTERFACES

• 4 x RS232/RS422 asynchronous serial channels:-

  • one RS232 channel accessed via front panel

  • two RS232/422 channels accessed via P2

  • one RS232 channel accessed via P2

• 16550 compatible UART

OTHER PERIPHERAL INTERFACES

• keyboard and mouse interfaces, sharing a single PS/2™ type connector on front panel, also accessible via P2 to an RTM

• PC-compatible Real Time Clock (Year-2000 compliant)

• 4 x USB 2.0 interfaces:-

  • one accessed via front panel

  • three accessed via P2 to an RTM

  • option for fixed USB Flash drive on RTM

• watchdog timer

• 1 x 32-bit Long Duration Timer with processor interrupt capability

• two CPU temperature monitors; voltages monitor; board temperature monitor

• legacy speaker interface

FLASH EPROM

• 1 Mbyte of BIOS Flash EPROM - 8-bits wide

FIRMWARE SUPPORT

• Phoenix® TrustedCore™ BIOS

• comprehensive Power-On Self-Test (POST)

• LAN boot firmware included

VME64x INTERFACE

• P1 and P2 connectors compatible with VME64x systems; backplane must be 5-row

• implemented using Tundra® Tsi148 PCI-X VME bridge

• VME Master/Slave

• A32/A24/A16/D64/D32/D16/D8(EO), MBLT64, 2eSST

• auto system controller detect

• full interrupter / interrupt handler support

• bus error interrupt hardware

SOFTWARE SUPPORT

• support for Linux®, Windows® Server 2003, Windows® XP, Windows® 2000, QNX®, Solaris™ and LynxOS®

ELECTRICAL SPECIFICATION

• +5V@10.0A (typical with 4 Gbytes DRAM); +5% / -3%

• +3.3V@0.0A; +5% / -3%

• +12V@0.0A; -12V@0.0A

• +12V and -12V routed to PMC expansion slot

• requires VME64x backplane to provide power

ENVIRONMENTAL SPECIFICATION

• operating temperatures:-

  • 0°C to +55°C (N-Series)

  • -25°C to +70°C (E-Series)

• storage temperature: -40°C to +85°C

• 10% to 90% Relative Humidity, non condensing (operating or storage)

SAFETY

• PCB (PWB) manufactured with flammability rating of 94V-0

MECHANICAL SPECIFICATION

• 6U form-factor

• single VME64x slot - front panel width 0.8inch (20.3mm)

• utilizes 160-way connectors for P1 and P2

• optional P0

• IEEE 1101.10 handles

• shock:
  20g, 11ms, ½ sine (operating);
  30g, 11ms, ½ sine (non-operating)

• vibration:
  5Hz-2000Hz at 2g, 0.38mm peak displacement (operating);
  5Hz-2000Hz at 5g, 0.76mm peak displacement (non-operating)