CENTRAL PROCESSOR

• 2.16 GHz Intel® Core™ 2 Duo processor T7400:-

  • uses mFC-PGA 478 (micro Flip-Chip Pin Grid Array) package

• 1.5 GHz Intel® Core™ 2 Duo processor L7400:-

  • uses mFC-BGA 478 (micro Flip-Chip Ball Grid Array) package

• common dual-core processor features are:-

  • 667 MHz Front Side Bus

  • 64 Kbytes of primary (L1) on-die cache

  • 4 Mbytes of shared secondary (L2) on-die cache

  • Intel® 64 Technology (64-bit computing)

  • no CPU fan; low power processor

• 2.0 GHz and 1.66 GHz Core Duo processor versions available; see VX 405/04x datasheet

• utilizes the mobile Intel® 945GME Express chipset

• provision for XDP debug port

DRAM

• supporting up to 4 Gbytes of 667MHz DDR2 SDRAM soldered on-board:-

  • peak bandwidth 10.6 Gbytes/s

  • dual channel architecture

• accessible from processor or VME bus

HARD DISK INTERFACES

• 2 x EIDE interfaces:-

  • supports up to Ultra-DMA 100 for high performance drives

  • second EIDE interface can be used for on-board 2.5 inch disk drive or CompactFlash™ or Microdrive™ Type II drive (all within a single slot)

  • primary channel supports up to two off-board EIDE drives via P2 connector

• one Serial ATA150 interface:-

  • accessible via VXS P0

  • transfer rate up to 150 Mbytes/s

ETHERNET INTERFACES

• 2 x rear I/O interfaces:-

  • implemented by Intel® 82571EB Controller

  • 2 x 10/100/1000Mbps Ethernet channels when P0 not fitted, accessed via P2 for either VME64x or VXS backplanes; or

  • 2 x 1000Mbps baseband IEEE 802.3 backplane ports, accessed via VXS P0 connector for VITA 41.3 on a VXS backplane

• 1 x Ethernet channel accessed via front panel RJ45 connector:-

  • implemented by Intel® 82573L Controller

  • supports 10/100/1000Mbps

GRAPHICS INTERFACE

• implemented by Intel 945GME chipset

• analog VGA accessed via a 15-way high density connector on front panel or P2:-

  • resolutions up to 2048 x 1536

  • supporting up to 16M colors

• flat panel supported by a Panel Link interface via P2 connector:-

  • resolutions up to 1600 x 1200

  • supporting up to 16M colors

PMC/XMC INTERFACE

• 1 x PMC slot supporting:-

  • I/O via front panel

  • 32/64-bit, 33/66 MHz PCI operation

  • 3.3V or 5V PCI signaling

  • XMC (PCI-Express Mezzanine Card) interface supported via x1 PCI Express™ Link

• option for dual PMC carrier board using baseboard XMC connector (uses PMC site)

STEREO AUDIO

• AC'97 interface on P0 supports High Definition Audio (HDA) Codec on breakout

• independent legacy speaker output via P2

SERIAL INTERFACES

• 2 x asynchronous RS232/RS422/RS485 serial channels:-

  • 1 x channel accessed via a 9-way D-type connector on the front panel

  • 1 x channel via P2 connector

• 16550 compatible UARTs

• both channels can be user configured for RS232, RS422 or RS485

OTHER PERIPHERAL INTERFACES

• keyboard and mouse interfaces via a single PS/2™ type connector on front panel and via P2 connector

• floppy disk interface via P2 connector

• 5 x USB 2.0 (Universal Serial Bus) interfaces:-

  • 2 x USB interface accessed via USB connectors on front panel

  • 1 x USB interface via P2 connector

  • 2 x USB interface via P0 connector

• 3 x General Purpose I/O bits via P2 connector

• PC Real Time Clock (Year 2000 compliant)

• watchdog timer

• 1 x 32-bit Long Duration Timer with processor interrupt capability

FIRMWARE SUPPORT

• Phoenix® TrustedCore® Server BIOS

• comprehensive Power-On Self-Test (POST)

• LAN boot firmware included

SOFTWARE SUPPORT

• support for Linux®, Windows® 2000, Windows® XP, Windows® XP Embedded, VxWorks®, Solaris™ and QNX®

FLASH EPROM

• 1 Mbyte of BIOS Flash EPROM

• 1 Mbyte of Flash EPROM

SAFETY

• PCB (PWB) manufactured with flammability rating of 94V-0

VME INTERFACE

• compatible with VME64x and VXS:-

  • P1 and P2 connectors compatible with VME64x and VXS systems; backplane must support 5-row (160-way) connectors

  • P0 connector compatible with VXS systems

• uses the Tundra® Universe IID™ device

• VME Master/Slave

• A32/A24/A16/D64/D32/D16/D8(EO)/MBLT64

• fast hardware byte swapping

• auto system controller detect

• full interrupter / interrupt handler support

• bus error interrupt hardware

ELECTRICAL SPECIFICATION

• +5V@7.5 A (typical at 2.16 GHz with 2 Gbytes SDRAM)

• +3.3V, +12V and -12V not utilized

• +12V and -12V routed to PMC expansion slot

ENVIRONMENTAL SPECIFICATION

• operating temperature:-

  • 0°C to +55°C (N-Series: up to 2.16 GHz)

  • -25°C to +70°C (E-Series: 1.5 GHz)

  • -40°C to +85°C (K-Series: 1.5 GHz)

• storage temperature: -40°C to +85°C (storage)

• 10% to 90% Relative Humidity, non-condensing (operating or storage):-

  • K-Series includes humidity sealant

MECHANICAL SPECIFICATION

• 6U form-factor 9.2 inches x 6.3 inches (233mm x 160mm)

• single slot: 0.8 inches (20.3mm)

• utilizes 160-way connectors for P1
  and P2

• optional P0 (for VXS backplanes only)

• shock: 20g, 11ms, ½ sine (operating);
  30g, 11ms, ½ sine (non-operating)

• vibration: 5Hz-2000Hz at 2g, 0.38mm peak displacement (operating);
  5Hz-2000Hz at 5g, 0.76mm peak displacement (non-operating)