Graphics Processor

• utilizes S3 Graphics 2300E 3D/2D triple display controller, which provides:-
  • 2 independent display engines
  • multi-display capability
  • digital resolutions up to 2560 x 1600
  • analog resolutions up to 2048 x 1536
  • 32-bit true color
  • 256 Mbytes of 64-bit dual channel gDDR2 DRAM
  • dual integrated RAMDAC
  • 128-bit graphics engine
  • PCI Express® interface
  • supports video overlay
• graphics engine clock:-
  • 300MHz for N-Series
  • 350MHz for E, RA, RC and K-Series
• gDDR2 memory clock:-
  • 400MHz for N-Series
  • 375MHz for E, RA, RC and K-Series

Digital Interfaces

• supports 2 x TMDS compliant displays via:-
  • DVI 1 accessible via front panel connector or switchable to rear I/O PMC Pn4 connector
  • DVI 2 accessible only through rear I/O PMC Pn4 connector
• supports active matrix (TFT) and passive (DSTN) panels
• up to 2560 x 1600 pixels
• up to 32-bit color
• 60Hz refresh rate
• supports twisted-pair cable, up to 5 meters in length

Analog Interfaces

• supports 2 x RGB compliant display:-
  • accessible via front panel DVI-I and VGA connectors
  • VGA 1 interface switchable to rear I/O PMC Pn4 connector or optional rear XMC Pn6 connector
  • VGA 2 interface switchable to rear I/O PMC Pn4 connector
• VGA 2 interface cannot be used simultaneously with TV output interface:-
  • uses same Pn4 pins
  • software selectable
• up to 2048 x 1536 pixels
• up to 32-bit color

TV Output Interface

• composite, S-Video or YPbPr (YUV) outputs via rear I/O PMC Pn4 connec
  • HD-TV capable
  • internal CE class encoder for, NTSC, PAL and HD-TV (all 18 DTV ATSC and DVB standards, including 1080p)
• TV output interface cannot be used simultaneously with VGA 2 interface:-
  • uses same Pn4 pins
  • software selectable

Multiple Displays

• 2 independent display engines:-
  • up to 2 displays driven simultaneously with the same or 2 different images
  • the same or 2 different resolutions
  • the same or 2 different refresh rates
• dependent on operating system software
• using multiple displays lowers the maximum available resolution, color depth and refresh rate

TV Input Interface

• supports multiple standards including
• PAL, NTSC and SECAM
• automatic detection, supports 50Hz and 60Hz field frequency
• suitable for video capture and video stream input
• supports video overlay

XMC Interface

• complies with PCI Express 1.1 protocol and electrical specification:-
  • supports link training for x1 to x8 lane widths

BIOS EPROM

• 1 Mbits Flash EPROM

Software Support

• support for Windows® XP, Windows® XP Embedded, Windows® 2000, and Linux®

Electrical Specification

• requires 3.3V and 5V supplies only:-
  • +5V @ 1.5A; +/-5% (typical)
  • +3.3V @ 500mA; +/-5% (typical)
• -12V supply not utilized
• +12V supply cannot be used

Safety

• PCB (PWB) manufactured with flammability rating of 94V-0

Environmental Specification

• operating temperatures planned:-
  • 0°C to +55°C (N-Series)
  • -25°C to +70°C (E-Series)
  • -40°C to +85°C (K-Series)
• storage temperatures:-
  • -40°C to +85°C
• 5% to 95% Relative Humidity, non-condensing (operating):-
  • K-Series includes humidity sealant
• ruggedized conduction-cooled and ruggedized air-cooled versions, see separate datasheets:-
  • rear plug compatible
  • conduction-cooled: XM 403/x33-RC (available)
  • air-cooled: XM 403/x33-RA (planned)

Mechanical Specification

• single size CMC (Common Mezzanine Card) 74mm x 149mm
• 10mm height stack module
• shock:
  • 30g, 11ms, ½ sine (non-operating)
  • 20g, 11ms, ½ sine (operating);
• vibration:
  • 5Hz-2000Hz at 2g, 0.38mm peak displacement (operating);
  • 5Hz-2000Hz at 5g, 0.76mm peak displacement (non-operating)