CompactPCI (cPCI)
Concurrent Technologies’ range of CompactPCI (cPCI) products provide the user with a choice of highly integrated boards based on a range Intel® processors. Typically these processor boards will operate as the system slot controller, as a peripheral controller and as a satellite board without the use of the cPCI interface. To suit the application environment, many of these boards are available in extended operating temperature variants. The CompactPCI standards are published by PICMG.
Read More
Read Less-
PP B7x/msd and PP B8x/msd – CompactPCI Processor
- 6U CompactPCI Processor Board
- Based on 6-core Intel® Xeon® Processor E-2176M
- Up to 32 Gbytes of DDR4 ECC memory
- Two XMC/PMC modules slots for local I/O expansion
- Local storage options
-
PP B1x/msd – CompactPCI Processor
- Not Suitable for New Designs
- 6U CompactPCI Processor Board
- Based on 4th Generation Intel® Core™ Processor
- Up to 32 Gbytes of DDR3 ECC memory
- Option for 2 x 10 Gigabit Ethernet ports on the front panel
- One or two XMC/PMC module slots for local I/O expansion
- CFast™ and 2.5-inch HDD/SSD options
-
TP B1x/msd – CompactPCI Processor
- Not Suitable for New Designs
- 3U CompactPCI processor board
- 4th Generation Intel® Core™ Processor
- Up to 16GB DRAM with error correction
- SATA, USB, Ethernet, graphics, GPIO and serial interfaces
- On board solid state disk option
-
TP B1x/3sd-RCx – Rugged CompactPCI Processor
- Not Suitable for New Designs
- 3U rugged conduction-cooled CompactPCI processor board
- 4th Generation Intel® Core™ processor
- Up to 16 Gbytes DRAM with error correction
- XMC site for user I/O
- Optional solid state disk site
-
TP D2x/msd – CompactPCI Processor
- 3U CompactPCI Processor board
- Intel® Atom™ processor E3800
- Solid State Storage options
- Optional second slot boards
-
TP D2x/msd-RC – 3U Rugged CompactPCI Processor
- 3U rugged conduction-cooled CompactPCI processor board
- Intel® Atom™ processor E3800
- Solid State Storage options
- Board support packages for Windows®, Linux® and VxWorks®
-
TP CR1/XMC – XMC Carrier
- 3U CompactPCI® Board
- 1 x XMC site
-
TP CR1/XMC-RC – Rugged XMC Carrier
- 3U CompactPCI® Board
- Conduction-cooled Rugged XMC Carrier
- 1 x XMC site
-
TP CR1/PMC-RC – Rugged PMC Carrier
- 3U CompactPCI® Rugged PMC Carrier
- Rugged Conduction-Cooled
- Occupies one slot
-
PP XMC/M02 – Dual XMC/PMC Carrier
- 6U CompactPCI® board
- Provides dual PMC/XMC sites
- Supports PMC/XMC combinations
- Supports one Processor XMC operating in root-complex mode
-
TP MS1/xxx – Storage Solution
- 3U CompactPCI Storage Solution
- Supports 2 x 2.5-inch SATA drives and 1 x Type-I CompactFlash® module
- Expansion board supports 2 x 2.5-inch SATA drives
-
FP 110/019 – Ethernet Switch
- 6U CompactPCI® 2.16 board
- Supports up to 19 payload boards
- Gigabit Ethernet connectivity
- Includes rear fabric link
- Either 4 x RJ45 or 2 x SFP port on front panel
-
FP 110/019-RC – Rugged Ethernet Switch
- 6U CompactPCI® 2.16 board
- Rugged conduction-cooled
- Supports up to 19 payload boards
- 10/100/1000Mbps Ethernet speeds
- Includes rear fabric to fabric interlink
- Non-blocking Layer 2 switching for wire-speed throughput
- Virtual LAN (VLAN) and Quality of Service (QoS) support
-
TP CR1/PMC – PMC Carrier
- 3U CompactPCI® Board
- Provides a single PMC site
- Occupies one slot
-
AD PP5/013 – Rear Transition Module
- 6U CompactPCI® Rear Transition Module
- Interfaces to PP B7x/msd
- Wide range of I/O connectors and headers
Showing 1–15 of 20 results
